Skip to content
Omnikalc

How much does a backyard putting green need?

Enter the green length and width, the gravel base depth, the sand infill per square foot and the installed cost per square foot: get the turf with 10% waste, the gravel base, the sand infill and the total cost.

Updated on
Your inputs
ft

Value out of range

ft

Value out of range

in

Value out of range

lb/sq ft

Value out of range

$

Value out of range

Results

Turf with 10% waste

264 sq ft

Total cost

$3,600

Grade the base with a slight slope for drainage and a few gentle breaks, compact the gravel well, and plan 2 to 4 cups on a small green; a nylon or polypropylene putting turf rolls faster than landscape turf
Gravel for the base
2.22 cu yd
Sand for infill
240 lb

A backyard putting green lets you practice short putts every day without driving to the course. Most home greens use synthetic putting turf laid on a compacted gravel base, then filled with sand so the ball rolls true. This calculator works out the turf, the gravel for the base, the sand infill and the total cost.

How the calculation works

  • Green area = length × width
  • Turf = area × 1.1 for cuts and curves
  • Gravel base = area × base depth
  • Sand infill = area × sand per square foot
  • Total cost = area × installed cost per square foot

A 20 × 12 ft green covers 240 sq ft. With 10% waste, buy about 264 sq ft of turf. A 3 in gravel base takes about 2.22 cu yd of crushed stone, and 1 lb of sand per square foot comes to 240 lb. At $15 per square foot, the green costs about $3,600.

Typical costs

Option Cost per sq ft
Do it yourself with a kit $5 to $12
Professional, simple shape $15 to $25
Professional with fringe, contours and chipping area $25 to $40

Building the green

  1. Mark the shape, then dig out about 4 in of soil and remove roots.
  2. Spread crushed stone or decomposed granite in layers and compact each one with a plate compactor.
  3. Shape a gentle slope of about 1% for drainage, plus a few soft breaks to read.
  4. Cut the cups into the base before laying the turf.
  5. Roll out the turf, seam it with seaming tape and glue, and nail or stake the edges.
  6. Brush in the sand infill in several passes until the fibers stand up.

Choosing turf

  • Nylon putting turf is the most durable and rolls fast, but costs more.
  • Polypropylene is cheaper and fine for occasional practice.
  • A fringe of longer landscape turf around the edge makes chipping practice possible.

Size ideas

A 10 × 15 ft green with 2 or 3 cups is enough for short putts. A green of 300 to 500 sq ft allows longer putts and real breaks. Check local rules and HOA guidelines before you change drainage on your lot.

Frequently asked questions

How much turf do I need for a putting green?

About 264 sq ft for a 20 × 12 ft green, 10% waste included.

How much does a backyard putting green cost?

About $3,600 for 240 sq ft at $15 per sq ft installed; a DIY kit costs $5 to $12 per sq ft.

How much gravel goes under a putting green?

About 2.22 cu yd for a 3 in base under a 20 × 12 ft green.

How much sand infill does putting turf need?

About 1 lb per square foot, so 240 lb for 240 sq ft.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.