Skip to content
Omnikalc

Green roof load and retention calculator: dead load of an extensive green roof and the rain it keeps

Enter the depth and unit weights of the growing medium, the drainage layer, the plants, the retention, the roof area and the storm depth to get the dry and saturated loads, the rain held, the runoff share and the volume retained.

Updated on
Your inputs
in

Value out of range

lb/ft³

Value out of range

lb/ft³

Value out of range

psf

Value out of range

psf

Value out of range

%

Value out of range

ft²

Value out of range

in

Value out of range

Results

Dead load when saturated

34.0 psf

Dead load when dry
25.7 psf
Depth of rain held by the medium
1.40 in
Share of the storm that runs off
20.0 %
Volume of water held by the roof
4,364 gal

The green roof load and retention calculator gives the dead load of a green roof, dry and saturated, from the depth and the unit weight of the growing medium, with the depth of rain that it holds, the share of a storm that runs off and the volume of water retained by the roof.

How the calculation works

  • Enter the depth of the growing medium and its unit weight when dry and when saturated, from the supplier’s data.
  • Enter the weight of the drainage layer with the membrane and of the plants.
  • Enter the water retention of the medium (percent by volume), the roof area and the rainfall depth of a storm.
  • The calculator finds the dead load when dry and when saturated, the depth of rain that the medium holds, the share of the storm that runs off and the volume of water held.

Example

A green roof has 4 in of medium of 65 lb/ft³ dry and 90 lb/ft³ saturated, with 3 psf of drainage layer and 1 psf of plants. The dry load is 4 / 12 × 65 + 3 + 1 = 25.7 psf and the saturated load is 4 / 12 × 90 + 3 + 1 = 34.0 psf. With a retention of 35% the medium holds 4 × 0.35 = 1.40 in of rain. In a storm of 1.75 in, 20.0% runs off, and a roof of 5,000 ft² holds 4,364 gal.

Why it matters

The calculator helps architects, structural engineers, landscape architects and building owners to check that a roof can carry a green roof, to choose the depth of the medium and to estimate the benefit for the stormwater. It shows the difference between the dry and the saturated load, which is the one that governs the structure.

Good to know

Use the weight at the maximum water content from the manufacturer, and add the weight of the paving, the ballast and the equipment that are on the roof. Check the load with the snow, which can add to the saturated weight. Provide drains and an overflow, and keep the waterproofing protected, with a root barrier.

The roof calculator covers the area and the pitch of a roof, the rainwater calculator covers the harvest of the roof water, the rain garden calculator sizes another stormwater feature and the snow load calculator gives the load of the snow.

Frequently asked questions

What is the load of a green roof?

An extensive green roof, with 2 to 6 in of lightweight medium and hardy plants such as sedum, weighs from 15 to 50 psf when saturated, and an intensive roof, with deeper soil, shrubs and trees, can weigh 80 psf or more. The structure must carry the saturated weight, because the medium is full of water after a rain, together with the other loads of the code, such as the snow.

How is the saturated load found?

The weight of the medium per square foot is its depth in feet multiplied by its saturated unit weight. To this are added the weight of the drainage layer, the membrane and the protection, and the weight of the plants. The supplier gives the weight at the maximum water content, and this is the value to use for the structural check, not the dry weight, which only matters for the lifting and the installation.

How much rain does a green roof retain?

The medium can hold a depth of rain equal to its depth multiplied by its water retention, so 4 in of medium with 35% hold 1.40 in. A storm smaller than that does not produce runoff, and a larger storm produces the excess. In practice the retention is also reduced if the medium is already wet, and the plants and the evaporation empty it between storms, so the annual retention of a green roof is typically 40 to 60%.

What are the limits of the calculator?

The calculator treats the retention as a simple storage that is empty at the beginning of the storm. It does not include the retention of the drainage layer, the delay of the peak flow, the evaporation, the snow or the ponding at the drains. The weights depend strongly on the product used. The structural check of the roof and the waterproofing must be made by the designer, with the data of the manufacturer.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.