A window well holds back the soil around a basement window, so light and air can reach it and, for a bedroom, so the window can serve as an emergency exit. Its size depends on the window and on how deep the sill sits below the ground. This calculator works out the width, the area, the depth and the gravel for the bottom.
How the calculation works
- Well width = window width + extra width on each side × 2
- Well area = well width × projection from the wall
- Well depth = sill depth below grade + gravel below the sill
- Gravel = area × gravel depth
A 36 in window with 6 in of extra width on each side needs a well 48 in wide. Projecting 36 in from the wall, it has 12 sq ft of area. With the sill 40 in below grade and 6 in of gravel below it, the well is 46 in deep and needs about 6 cu ft of gravel.
Egress rules in the US
For a basement bedroom window used as an emergency escape, the International Residential Code asks for:
| Requirement | Minimum |
|---|---|
| Well area | 9 sq ft |
| Projection from the wall | 36 in |
| Ladder or steps | needed if the well is deeper than 44 in |
| Window opening | 5.7 sq ft, at least 20 in wide and 24 in high |
| Sill height inside | 44 in or less above the floor |
The default example meets the area and projection rules, but at 46 in deep it needs a permanently fixed ladder. Local codes can differ, so check with your building department.
Building tips
- Use a corrugated steel or composite well bolted to the foundation, sized a little wider than the window frame.
- Put gravel in the bottom and connect it to the foundation drain or a deep gravel bed, so rain does not pool against the window.
- Slope the soil away from the well and the house.
- Add a cover to keep out leaves, snow and animals; on an egress window, it must open from inside without tools.
- Clean out leaves each fall, and check that the drain still works after heavy rain.