A bay window pushes out from the wall in three sections: a center window parallel to the wall and two side windows set at an angle. It adds light, views and a little floor space, often enough for a seat. This calculator works out how far the bay projects, how wide the opening in the wall must be, the floor it adds and the total width of window.
How the calculation works
- Projection = side window width × sin(side angle)
- Wall opening = center width + 2 × side width × cos(side angle)
- Floor area added = projection × (center width + wall opening) ÷ 2
- Total window width = center width + 2 × side width
With a 60 in center window and two 24 in side windows at 45°, the bay projects 17.0 in from the wall. The rough opening in the wall must be about 93.9 in wide, and the bay adds about 9.1 sq ft of floor, with 108 in of window across the three sections. These are center-line sizes; the manufacturer’s rough opening includes the frame.
Angles and shapes
| Side angle | Shape | Projection with 24 in sides |
|---|---|---|
| 30° | shallow bay | 12 in |
| 45° | classic bay | about 17 in |
| 90° | box bay | 24 in |
A bow window uses four or more equal sections on a curve, so it projects less for the same width. A box bay with square sides gives the most floor space and suits a deep seat or a desk.
Planning tips
- A wider opening needs a header sized for the load above, and often temporary support while you cut the wall.
- Bays that project more than about 2 ft usually need brackets, cables or a foundation; check the manufacturer’s instructions.
- The roof or seat board of the bay must be flashed and insulated, or it will be a cold spot.
- A bay is a good place for a window seat with storage below; plan an outlet or a heat register if needed.
- Changing the outside of the house may need a permit, and in some areas a design review.