Skip to content
Omnikalc

How much plywood for a built-in window seat?

Enter the seat length, depth and finished height and the cushion thickness: get the box height, the plywood area with 15% for waste, the sheets, the storage inside and the seat area for the cushion.

Updated on
Your inputs
in

Value out of range

in

Value out of range

in

Value out of range

in

Value out of range

Results

Plywood sheets

2

Storage inside

9.7 cu ft

Box height
14 in
Plywood with 15% waste
37.1 sq ft
Seat area for the cushion
8.3 sq ft
A finished height of 17 to 19 in matches a chair; fit a lid with soft-close hinges or a lid stay so it cannot slam on small fingers, and leave the heating register clear or vent it through the front

A built-in window seat turns an awkward bay or alcove into a reading nook with storage underneath. Structurally, it is a simple plywood box topped with a cushion. This calculator works out the box height, the plywood with a margin for waste, the number of sheets, the storage inside and the seat area for the cushion.

How the calculation works

  • Box height = finished seat height − cushion thickness
  • Plywood = (2 × length × depth + 2 × length × box height + 2 × depth × box height) × 1.15, for the top, bottom, front, back and two ends with 15% for waste
  • Sheets = plywood ÷ 32 sq ft per 4 × 8 sheet, rounded up
  • Storage = length × depth × box height
  • Cushion area = length × depth

A window seat 60 in long and 20 in deep with an 18 in finished height and a 4 in cushion needs a box 14 in high. That takes about 37.1 sq ft of plywood with waste, or 2 sheets of 4 × 8, and gives about 9.7 cu ft of storage under an 8.3 sq ft seat.

Comfortable dimensions

Item Typical value
Finished seat height 17 to 19 in, like a chair
Seat depth 18 to 24 in to sit; 24 to 30 in to lounge or nap
Cushion 3 to 5 in of firm foam
Length to lie down at least 72 in
Knee space under a sill the window sill at least 10 to 12 in above the cushion

Building tips

  • Use 3/4 in plywood for the top and front; the back and bottom can be thinner if they sit against the wall and floor.
  • Build a 2 × 4 base a few inches in from the front so the box sits level and the trim hides any gaps.
  • For storage, choose a hinged lid with soft-close hinges or a lid stay, or drawers in the front, which are easier to reach than a lid under a cushion.
  • Leave the heating register or radiator clear, or move it to the front of the seat with a grille.
  • Paint or trim the box to match the room’s woodwork so it looks original.
  • Make the cushion cover removable so it can be washed.

Frequently asked questions

How high should a window seat be?

About 17 to 19 in with the cushion, like a chair, so an 18 in seat with a 4 in cushion needs a 14 in box.

How deep should a window seat be?

18 to 24 in to sit, 24 to 30 in to lounge; 20 in is a good middle.

How much plywood for a window seat?

About 37.1 sq ft with waste for a 60 × 20 in seat, or 2 sheets of 4 × 8.

How much storage is in a window seat?

About 9.7 cu ft in a 60 × 20 × 14 in box.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.