Skip to content
Omnikalc

Capstan equation calculator: holding force, turns and friction multiplication

Enter the holding force, the friction coefficient and the number of turns of a rope around a post to get the load it can hold, the force needed for a given load and the turns to add.

Updated on
Your inputs
lbf

Value out of range

Value out of range

Value out of range

lbf

Value out of range

Results

Maximum load that can be held

2,169 lbf

Friction multiplication ratio
43.4
Wrap angle
720 °
Holding force needed for the load
23.1 lbf
Turns needed for the load
1.59 turns
Safety margin on the load
2.17
Comfortable margin

The capstan equation shows how friction lets a small force hold a very large one when a rope is wrapped around a post. The capstan calculator gives the load that a number of turns can hold, the force needed to hold a given load, the turns needed and the safety margin.

How the calculation works

  • Enter the holding force that you apply on the free end of the rope, and the friction coefficient between the rope and the post (about 0.2 to 0.4 for a dry rope on a metal or wood bollard).
  • Enter the number of turns around the post and the load that you want to hold.
  • The calculator applies the capstan equation T(load) = T(hold) × e^(μ θ), where θ is the wrap angle in radians (2π per turn).
  • Read the maximum load that can be held, the force needed to hold your load, the turns needed and the safety margin.

Example

You hold the free end of a rope with 50 lbf and wrap it 2 turns around a post, with a friction coefficient of 0.3. The wrap angle is 720°, or 4π radians, so the friction multiplies the force by e^(0.3 × 4π) = 43.4. The rope can hold 2,169 lbf. To hold a load of 1,000 lbf, you need only 23.1 lbf at the free end, and 1.59 turns would be enough, so 2 turns give a safety margin of 2.17.

Why it matters

The calculator helps sailors, riggers, farmers, climbers, stage crews and students to understand why turns on a cleat, a bollard or a winch drum hold so well, and to estimate how many turns to take and how hard to hold. It also explains the tension in belts that slide on a pulley.

Good to know

Use a conservative friction coefficient, since wet or worn ropes slip more than dry ones. Add one extra turn beyond the result, and keep the turns neatly side by side so the rope does not ride over itself. Remember that the load end of the rope is under the full tension, so the post must be strong enough for the whole load.

The pulley calculator covers the mechanical advantage of rope systems, the torque calculator relates force and lever arm, the inclined plane calculator uses the same friction coefficient, and the belt length calculator sizes a belt on two pulleys.

Frequently asked questions

What is the capstan equation?

The capstan equation, also called the Euler-Eytelwein formula, links the force on the loaded end of a rope to the force on the free end when the rope slides or is about to slide on a cylinder: T(load) = T(hold) × e^(μ θ). The force grows exponentially with the friction coefficient μ and the wrap angle θ, which is why a few turns on a bollard let a person stop a large ship.

Does the diameter of the post matter?

No. Only the total wrap angle and the friction coefficient count. A small post and a large post give the same ratio for the same number of turns, as long as the rope bends freely on the post. A very small radius, however, damages the rope and reduces its strength, so use a post that is large enough for the rope.

How many turns should I use?

Use the turns needed from the calculator and add at least one turn for safety. Each extra turn multiplies the holding capacity by e^(2πμ), about 6.6 times for a friction coefficient of 0.3. Wet, icy or oily ropes have a much lower coefficient than dry ones, and a new smooth rope on a polished post can fall below 0.15.

Can I use it to rate a hoist or a climbing system?

No. The equation is a model with a constant friction coefficient and an ideal flexible rope. It does not account for wear, heating, stiffness or dynamic shock, and it is not a safety rating. For lifting or climbing, use rated equipment and the instructions of the manufacturer.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.