Skip to content
Omnikalc

Fire hose nozzle reaction and friction loss calculator

Enter the tip diameter, the nozzle pressure, the hose size and length and the height to get the nozzle flow, the reaction, the friction loss and the pump discharge pressure.

Updated on
Your inputs
in

Value out of range

psi

Value out of range

ft

Value out of range

ft

Value out of range

Results

Pump discharge pressure

77.6 psi

Nozzle flow
210 gpm
Nozzle reaction
78.5 lb
A firefighter can usually control this reaction
Friction loss in the hose
17.6 psi
Pressure of the elevation
10.0 psi

The fire hose nozzle reaction and friction loss calculator gives the nozzle flow, the nozzle reaction, the friction loss in the hose, the pressure of the elevation and the pump discharge pressure for a hose line with a smooth bore nozzle, from the tip diameter, the nozzle pressure and the hose.

How the calculation works

  • Enter the diameter of the nozzle tip and the nozzle pressure.
  • Choose the hose size, and enter its length and the height of the nozzle above the pump.
  • The calculator finds the flow, the nozzle reaction, the friction loss, the elevation pressure and the pump discharge pressure.

Example

A smooth bore nozzle of 1 in at 50 psi flows 29.7 × 1² × √50 = 210 gpm, and its reaction is 1.57 × 1² × 50 = 78.5 lb. In 200 ft of 2.5 in hose, the friction loss is 2 × 2.1² × 2 = 17.6 psi. A nozzle 20 ft above the pump adds 0.5 × 20 = 10.0 psi. The pump discharge pressure is 50 + 17.6 + 10.0 = 77.6 psi.

Why it matters

The calculator helps firefighters, fire protection engineers, safety officers and students to estimate the flow and the pressure of a hose line, to see how the tip and the hose change the friction and the reaction, and to check a temporary fire line on a construction site.

Good to know

Use a hose that is large enough for the flow to keep the friction low, and keep the length as short as possible. Open and close the nozzle slowly to avoid the water hammer, and check the hose couplings and the gaskets. For a standpipe on a construction site, test the pressure and the flow at the top outlet before the work starts.

The spray nozzle flow calculator gives the flow of a nozzle at another pressure, the needed fire flow calculator gives the flow for a building, the sprinkler system demand calculator gives the demand of a sprinkler system and the standpipe calculator gives the flow and the pressure of a standpipe.

Frequently asked questions

How is the flow of a smooth bore nozzle found?

The flow of a smooth bore nozzle, in gpm, is 29.7 times the square of the diameter of the tip, in inches, times the square root of the nozzle pressure, in psi. It is the usual formula of the fire service, and it comes from the equation of the flow through an orifice with a discharge coefficient near 0.97. The flow grows with the square of the diameter and with the square root of the pressure.

What is the nozzle reaction?

The nozzle reaction is the force which pushes the nozzle back toward the firefighters, because the water leaves the nozzle at a high speed. For a smooth bore nozzle, it is 1.57 times the square of the diameter times the nozzle pressure, in pounds. A reaction above about 100 lb is difficult for a single person to hold, and a reaction near 150 lb needs more people or a support.

How is the friction loss in the hose found?

The friction loss, in psi, is a coefficient of the hose times the square of the flow in hundreds of gpm times the length in hundreds of feet. The coefficient is about 15.5 for a 1.75 in hose, 2 for a 2.5 in hose, 0.8 for a 3 in hose and 0.2 for a 4 in hose. A change of the elevation adds or removes 0.5 psi for each foot of height.

What are the limits of the calculator?

The calculator uses the usual formulas for a smooth bore nozzle and a single hose line. It does not take into account the fog nozzles, the appliances, the wyes, the hoses in parallel, the old or damaged hoses, or the real coefficient of the hose of a manufacturer. The pump pressures of a real operation must follow the procedures of the fire department.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.