The coating dry film thickness calculator gives the wet film thickness, the total dry film thickness, the theoretical and practical coverage and the quantity of coating to buy, from the dry film thickness wanted, the volume solids, the loss during the application, the area and the number of coats.
How the calculation works
- Enter the dry film thickness wanted for each coat and the volume solids of the coating.
- Enter the loss during the application and the number of coats.
- Enter the area to get the wet film thickness, the coverage and the quantity of coating to buy.
Example
A coating with 60 % volume solids must reach 5 mils dry per coat. The wet film is 5 / 0.60 = 8.3 mils. The theoretical coverage is 1,604 × 0.60 / 5 = 192.5 ft²/gal. With 25 % of loss, the practical coverage falls to 144.4 ft²/gal. For 12,000 ft² in 2 coats, the job needs 12,000 × 2 / 144.4 = 166.3 gal, for a total dry film of 10 mils.
Why it matters
The calculator helps painters, coating inspectors, estimators, steel fabricators and facility managers to order the right quantity of coating, to know the wet film to measure during the application, and to compare products of different volume solids on the cost of the dry film that they leave and not only on the price of the gallon.
Good to know
Compare the coatings on the cost per square foot of dry film, which is the price of the gallon divided by the practical coverage. Measure the wet film during the application on a clean test panel, and measure the dry film with a gauge after the cure. Follow the minimum and maximum thickness of the data sheet, because a coat that is too thick may crack or stay soft, and a coat that is too thin does not protect.
Related tools
The paint calculator gives the paint for the walls of a room, the painting cost calculator estimates the cost of a painting job, the spray paint calculator estimates the paint for a spray job and the pavement marking paint quantity calculator gives the paint for the lines of a road.