Skip to content
Omnikalc

Pavement marking calculator: how much striping paint and beads a job needs

Enter the length of the lines, the width, the film thickness, the waste allowance, the bead rate and the container size to get the area, the paint, the beads and the containers.

Updated on
Your inputs
ft

Value out of range

in

Value out of range

mil

Value out of range

%

Value out of range

lb/gal

Value out of range

Results

Paint needed

34.3 gal

Area to be marked
3,333 ft²
Glass beads needed
205.7 lb
Containers to buy
7

The pavement marking calculator gives the area to be marked, the gallons of paint, the pounds of glass beads and the number of containers for a parking lot or a road striping job, from the length and the width of the lines, the film thickness and the waste allowance.

How the calculation works

  • Enter the total length of the lines to paint and the width of the line.
  • Enter the wet film thickness, the allowance for waste, the rate of glass beads and the container size.
  • The calculator finds the area to be marked, the paint needed, the glass beads needed and the number of containers to buy.

Example

A parking lot has 10,000 ft of lines of 4 in, so the area is 10,000 × 4 / 12 = 3,333 ft². With a wet film of 15 mil, the paint is 3,333 × 15 / 1,604 = 31.2 gal, and with an allowance of 10 % it is 34.3 gal. With 6 lb of beads per gallon, the beads weigh 34.3 × 6 = 205.7 lb. With 5 gallon pails, 34.3 / 5 = 6.9, so 7 pails are bought.

Why it matters

The calculator helps striping contractors, facility managers, road crews, estimators and students to order the right quantity of paint and beads, to compare the container sizes and to estimate the cost of re-striping a parking lot, a warehouse or a street.

Good to know

Clean and dry the surface before painting, and apply the paint when the pavement and the air are above the minimum temperature of the data sheet. Use a layout with a string line or a pre-marking, check the film thickness with wet film gauges and drop the beads at once. Do not forget the symbols, the arrows and the parking stall numbers, which use more paint than their length shows.

The paint calculator estimates the paint for the walls, the painting cost calculator gives the price of a paint job, the driveway paving cost calculator estimates the pavement and the stopping sight distance calculator checks the visibility on a road.

Frequently asked questions

How is the quantity of marking paint calculated?

The area of the lines is their length times their width. The volume of paint is the area times the wet film thickness. One gallon spread at a thickness of 1 mil covers 1,604 ft², so the gallons are the area times the thickness in mils, divided by 1,604. An allowance is added for the waste, the overspray, the cleaning of the machine and the rough surfaces.

What film thickness is used?

A traffic paint is usually applied at a wet film of 15 mil (375 µm), which gives a dry film of about 7 to 8 mil. A thermoplastic is applied at 60 to 120 mil, and an epoxy at 15 to 30 mil. The specification of the road authority gives the thickness, the type of paint and the rate of the glass beads, and a rough or old surface can need more paint.

Why are glass beads used?

The glass beads are dropped on the wet paint, so that they stay in the film and reflect the light of the headlights back to the driver. The usual rate is about 6 lb per gallon of paint (0.72 kg per liter), or more for a high reflectivity. The beads must be applied right after the paint, while it is wet, and the type must fit the paint and the specification.

What are the limits of the calculator?

The calculator uses the dry lines only and does not include the symbols, the arrows and the legends, the two coats, the pre-marking layout, the primer on new concrete, the cleaning of the surface or the difference between the dry and the wet time. For a big job, measure the length of each type of line on the plan and add the symbols as separate areas.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.