Skip to content
Omnikalc

Dowel bar bearing stress calculator: load transfer at a concrete joint

Enter the wheel load, the load transfer, the number of dowels, the dowel diameter, the joint opening, the support modulus and the concrete strength to get the dowel load, the bearing stress and the ratio.

Updated on
Your inputs
lb

Value out of range

%

Value out of range

Value out of range

in

Value out of range

pci

Value out of range

psi

Value out of range

Results

Maximum bearing stress on the concrete

1,252 psi

Load on the critical dowel
1,200 lb
Allowable bearing stress
3,667 psi
Ratio of the stress to the allowable
0.34
The dowel bearing is acceptable

The dowel bar bearing stress calculator gives the load on the critical dowel, the maximum bearing stress on the concrete, the allowable bearing stress and the ratio for a dowelled joint of a pavement or a slab, from the wheel load, the load transfer, the dowel size and the joint opening.

How the calculation works

  • Enter the wheel load, the share of the load transferred by the joint and the number of dowels that share it.
  • Choose the dowel diameter and enter the joint opening, the modulus of dowel support and the concrete strength.
  • The calculator finds the load on the critical dowel, the bearing stress on the concrete, the allowable stress and the ratio.

Example

A wheel load of 9,000 lb is transferred at 40 % by a joint, and 3 dowels share the load, so the critical dowel carries 9,000 × 0.40 / 3 = 1,200 lb. The dowel has a diameter of 1.25 in, the joint opens 0.25 in, and the support modulus is 1,500,000 pci. With the Friberg analysis, the bearing stress is 1,252 psi. The allowable stress is (4 − 1.25) / 3 × 4,000 = 3,667 psi, so the ratio is 0.34.

Why it matters

The calculator helps pavement and industrial floor designers, contractors, inspectors and students to check the size and the number of the dowels at a joint, to see how the joint opening and the diameter change the bearing stress, and to compare the dowels of a joint with the load of a forklift or a truck.

Good to know

Use smooth, straight and well-aligned dowels, coated or greased on one side so that the joint can move, and hold them with baskets so that they do not move during the placing. Keep the joint opening small with a good joint spacing, and increase the diameter or the number of dowels for heavy wheel loads. Check the alignment on site because a skewed dowel locks the joint and causes cracks.

The slab joint spacing calculator gives the spacing of the joints, the joint sealant movement and width calculator sizes the joint sealant, the punching shear calculator checks the slabs under concentrated loads and the rebar development length calculator checks the embedment of the bars.

Frequently asked questions

What is a dowel bar?

A dowel is a smooth steel bar placed across a joint of a concrete pavement or a slab, which transfers the load from one slab to the next while letting the joint open and close with the temperature. The dowels reduce the faulting, the corner cracking and the deflection of the joint. They are used in the transverse joints of the pavements, the industrial floors and the bridge decks.

What is the bearing stress?

The load on the dowel is transferred to the concrete by bearing under the bar, and the concrete has a high stress right at the face of the joint. The stress is the modulus of support of the concrete times the deflection of the dowel at the face of the joint. The Friberg analysis finds the deflection of the dowel as a beam on an elastic foundation, from the load, the joint opening, the stiffness of the bar and the support modulus.

What is the allowable bearing stress?

The allowable bearing stress of the concrete under a dowel is given by the formula of Bradbury and Friberg, which is (4 − d) / 3 times the compressive strength of the concrete, with d the diameter in inches. For a 1.25 in dowel, it is about 0.92 times the compressive strength. A large diameter reduces the bearing stress, and a loose dowel in an oversized hole increases the deflection.

What are the limits of the calculator?

The calculator checks the bearing stress under one dowel with the analysis of Friberg. It does not include the bending and the shear of the dowel, the dowel misalignment, the corrosion, the fatigue under many load repetitions, the effect of the temperature curling or the load sharing along the joint, which depends on the radius of relative stiffness. For a pavement, follow the design guide of the owner and the dowel spacing of the standard.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.