Skip to content
Omnikalc

What size should a headboard be?

Enter the mattress width, the extra width on each side, the height above the mattress, the part hidden behind it, the mattress top height, the fabric wrap and the fabric width: get the panel size, the foam, the fabric length and the height of the top of the headboard.

Updated on
Your inputs
in

Value out of range

in

Value out of range

in

Value out of range

in

Value out of range

in

Value out of range

in

Value out of range

in

Value out of range

Results

Panel width

64 in

Panel height

40 in

Foam area
17.8 sq ft
Fabric length along the roll
2.0 yd
Top of the headboard above the floor
54 in
Use 3/4 to 1 in plywood or MDF, 2 to 3 in of foam with a layer of batting on top, and hang the headboard on a French cleat screwed into the studs so it stays put

An upholstered headboard is one of the easiest furniture projects to make yourself: a panel of plywood, some foam and batting, and fabric stapled around the back. Getting the size right is what makes it look built-in rather than homemade. This calculator works out the panel, the foam and the fabric, and where the top of the headboard ends up.

How the calculation works

  • Panel width = mattress width + 2 × extra width on each side
  • Panel height = height showing above the mattress + part hidden behind it
  • Foam area = panel width × panel height
  • Fabric length = panel width + 2 × wrap, if the panel height plus the wrap fits within the fabric width
  • Top of the headboard = height of the mattress top + height showing

For a 60 in queen mattress with 2 in of extra width on each side, the panel is 64 in wide. With 30 in showing above the mattress and 10 in hidden behind it, it is 40 in tall. You need about 17.8 sq ft of foam and, with 4 in of fabric wrapped around the back, 2.0 yd of 54 in wide fabric. With the mattress top at 24 in, the headboard reaches 54 in above the floor.

Mattress widths

Bed Mattress width Typical headboard width
Twin 38 in 40 to 42 in
Full 54 in 56 to 58 in
Queen 60 in 62 to 66 in
King 76 in 78 to 82 in
California king 72 in 74 to 78 in

Proportions

  • A headboard 30 to 36 in above the mattress suits most rooms; taller panels make a statement under high ceilings.
  • Keep the top well below a window or a shelf, and leave room for bedside lamps.
  • Extending the headboard to the nightstands makes a small bedroom look wider.

Building tips

  • Use 3/4 in plywood or MDF, and drill a few holes so the foam can breathe.
  • Glue 2 to 3 in of foam, cover it with a layer of batting to soften the edges, then stretch the fabric and staple it at the back, starting from the middle of each side.
  • Pick an upholstery-weight fabric and, for patterns, buy extra to center the design.
  • Hang the headboard on a French cleat screwed into the studs, or bolt it to the bed frame, so it does not move when you lean on it.

Frequently asked questions

What size headboard for a queen bed?

About 62 to 66 in wide for a 60 in queen mattress; 64 in with 2 in of overhang each side.

How tall should a headboard be?

Usually 30 to 36 in above the mattress, or about 54 in from the floor with a 24 in mattress top.

How much fabric for a queen headboard?

About 2.0 yd of 54 in fabric for a 64 × 40 in panel with 4 in of wrap.

How thick should headboard foam be?

2 to 3 in of foam with a layer of batting on top.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.