Skip to content
Omnikalc

Fall protection clearance calculator: clearance needed below a worker

Enter the lanyard length, the anchor height, the deceleration distance, the D-ring shift, the height to the feet and the margin to get the free fall, the total fall and the required clearance.

Updated on
Your inputs
ft

Value out of range

ft

Value out of range

ft

Value out of range

ft

Value out of range

ft

Value out of range

ft

Value out of range

ft

Value out of range

Results

Required clearance below the working level

18.5 ft

Free fall distance
6.0 ft
Within the free fall limit of 6 ft
Total fall distance of the D-ring
10.5 ft
Margin left
1.5 ft
Enough clearance

The fall protection clearance calculator gives the free fall distance, the total fall distance, the required clearance and the margin left below a worker with a lanyard and an energy absorber, from the length of the lanyard, the anchor height, the deceleration distance and the safety margin.

How the calculation works

  • Enter the length of the lanyard, the height of the anchor relative to the D-ring and the deceleration distance of the energy absorber.
  • Enter the D-ring shift, the distance from the D-ring to the feet, the safety margin and the clearance available below the working level.
  • The calculator finds the free fall distance, the total fall distance, the required clearance and the margin left.

Example

A worker uses a lanyard of 6 ft tied at the height of the D-ring (0 ft above), so the free fall is 6.0 ft. The absorber extends 3.5 ft and the harness and the D-ring shift add 1 ft, so the total fall of the D-ring is 6 + 3.5 + 1 = 10.5 ft. The D-ring is 5 ft above the feet and the safety margin is 3 ft, so the required clearance is 10.5 + 5 + 3 = 18.5 ft. With 20 ft available, the margin is 1.5 ft.

Why it matters

The calculator helps safety managers, site supervisors, roofers, steel erectors and students to check that a fall arrest system will stop a worker before the lower level, to compare an anchor at the feet with an anchor overhead, and to plan the fall protection of a roof or a floor edge.

Good to know

Always read the instructions of the manufacturer for the real deceleration distance and the clearance of the equipment, and anchor above the D-ring whenever it is possible. Inspect the harness, the lanyard and the anchor before each use, and plan the rescue so that a suspended worker is reached quickly. Do not use a fall arrest system when the clearance is less than the required value, and choose a self-retracting lifeline or a guardrail instead.

The falling weight impact calculator gives the energy of a fall, the OSHA incident rate calculator measures the safety record of a site, the sling angle calculator checks the rigging and the stopping distance calculator relates the speed to the braking distance.

Frequently asked questions

What is the clearance distance in fall protection?

The fall clearance is the free space needed below the working level so that a worker who falls is stopped before hitting the ground or a lower structure. It is the sum of the free fall, the deceleration distance of the absorber, the stretch of the harness and the shift of the D-ring, the height from the D-ring to the feet, and a safety margin. The distance must be checked for each anchor point.

What is the free fall limit?

In the United States, the regulations of OSHA limit the free fall of a personal fall arrest system to 6 ft (1.8 m), and the maximum arresting force to 1,800 lb (8 kN) with a body harness. The free fall is the distance that the worker falls before the system begins to slow the fall. Anchoring above the D-ring reduces the free fall, and anchoring at the feet increases it.

Why is the anchor height important?

An anchor above the worker's D-ring gives a short free fall and the lowest total distance. An anchor at the level of the feet makes the free fall longer by the distance between the feet and the D-ring, and a self-retracting lifeline anchored overhead stops the fall in a much shorter distance. The calculator uses a negative height when the anchor is below the D-ring.

What are the limits of the calculator?

The calculator is a simple sum and does not replace the instructions of the manufacturer of the equipment, which give the deceleration distance, the shift and the clearance for each model and for the weight of the worker. It does not include the swing fall, the sag of a horizontal lifeline, the rescue time or the specific rules of the jurisdiction, and a competent person must approve the fall protection plan.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.