A wood mantel looks good above a fireplace, but it must stay far enough from the opening that heat and sparks do not ignite it. Building codes set those distances for masonry fireplaces. This calculator works out how high the mantel must sit, how close side trim can come and how long the mantel will be with its legs.
How the calculation works
- Clearance above the opening = 8 × mantel depth, at least 6 in, and no more than 12 in is required
- Mantel underside height = hearth height + opening height + clearance
- Trim distance from the opening = 8 × trim projection, at least 6 in, capped at 12 in
- Mantel length = opening width + 2 × trim distance + 2 × leg width
An 8 in deep wood mantel projects too far to sit within 12 in of the opening, so it must be at least 12 in above it. Over a 30 in high opening on a 2 in hearth, the underside of the mantel sits about 44 in from the floor. Side trim that projects 3/4 in can come within 6 in of the opening. With a 36 in wide opening and 6 in legs, the mantel is about 60 in long.
The code rule
The IRC (R1001.11) says that no woodwork or other combustible material may sit within 6 in of a masonry fireplace opening. Within 12 in of the opening, combustible material may not project more than 1/8 in for each inch of distance. So a 1/2 in molding needs 6 in, a 1 in molding needs 8 in, and anything deeper than 1.5 in, such as a mantel shelf, needs at least 12 in.
| Projection | Minimum distance |
|---|---|
| up to 3/4 in | 6 in |
| 1 in | 8 in |
| 1.5 in or more | 12 in |
Tips
- Factory-built fireplaces and inserts come with their own clearances in the installation manual; those take precedence.
- A non-combustible mantel of stone or metal can sit lower, if the manufacturer allows it.
- A deeper mantel shields a TV above from heat, but check the TV maker’s temperature limit.
- Gas fireplaces can run hot at the top: measure the mantel temperature after an hour of use.