Skip to content
Omnikalc

How much stain do I need for my fence?

Enter the length and height of the fence, the sides to stain and the style of boards: get the surface, the gallons of stain, the cans to buy and the cost.

Updated on
Your inputs
ft

Value out of range

ft

Value out of range

%

Value out of range

sq ft/gal

Value out of range

Value out of range

gal

Value out of range

$

Value out of range

Results

Stain needed

17.6 gal

Rough-sawn and very dry wood can drink up to twice the label rate: test a section and adjust

Cans to buy

18

Cost of the stain

$630

Surface to stain
1,200 sq ft

Staining a fence protects the wood from sun and rain and keeps it looking even, but it is easy to run out halfway down a side. This calculator works out the surface to stain from the length, the height, the sides and the style of boards, then turns it into gallons, cans and cost.

How the calculation works

  • Surface = length × height × sides × style factor
  • Stain = surface × (1 + extra) × coats ÷ coverage per coat
  • Cans = stain ÷ can size, rounded up
  • Cost = cans × price per can

The style factor is 1 for solid boards, about 0.7 for pickets with gaps and about 1.25 for board-on-board, where the boards overlap and the edges add surface.

A 100 ft fence 6 ft high, stained on both sides, has 1,200 sq ft to cover. With 10% extra for rough wood, posts and rails, and 2 coats at 150 sq ft per gallon, you need 17.6 gallons: 18 one-gallon cans, about $630 at $35 a can.

Coverage in practice

Surface Typical coverage per gallon
Smooth, planed boards 200 to 300 sq ft
Rough-sawn boards 100 to 150 sq ft
Old, dry wood, first coat 75 to 125 sq ft
Second coat often 30 to 50% better than the first

The label rate assumes a smooth surface. New rough cedar or old weathered boards can absorb far more, so the default of 150 sq ft is deliberately cautious.

Getting a good result

  • Let a new pressure-treated fence dry for several weeks before staining; water should soak in, not bead.
  • Clean the fence and let it dry for a day or two before you start.
  • Stain in the shade or on a mild, dry day, with no rain expected for 24 to 48 hours.
  • A sprayer is fast on pickets but wastes more stain; back-brush to work it into the grain.
  • Buy all the cans from the same batch, or mix them in a bucket, for an even color.

One side or both?

Staining only your side saves about half the stain and time, but the bare side weathers faster. On a shared fence, talk to your neighbor first: some prefer a different color, and many towns and homeowner associations have rules on fence finishes.

Frequently asked questions

How much stain for a 100 ft fence?

About 17.6 gallons for a 6 ft fence stained on both sides with 2 coats at 150 sq ft a gallon, including 10% extra.

How many square feet is a 100 ft by 6 ft fence?

600 sq ft per side, 1,200 sq ft for both sides.

How far does a gallon of fence stain go?

Often 100 to 150 sq ft on rough wood and 200 to 300 sq ft on smooth boards.

Should I stain both sides of my fence?

Both sides last longer; one side uses about half the stain.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.