Skip to content
Omnikalc

How many stakes and rods for a wattle fence?

Enter the fence length and height, the stake spacing, the depth stakes go into the ground, the rod diameter and the rod length: get the stakes and their length, the rows of rods, the total rod length and the number of rods to cut.

Updated on
Your inputs
ft

Value out of range

ft

Value out of range

in

Value out of range

in

Value out of range

in

Value out of range

ft

Value out of range

Results

Stakes

21

Rods to cut

99

Cut flexible hazel or willow in late winter and weave it fresh; alternate the rod ends and press each row down tightly
Stake length
4.5 ft
Rows of rods
36
Total rod length (+10% for weaving)
792 ft

A wattle fence is woven from flexible rods, usually hazel or willow, around upright stakes. It makes a natural, rustic border for vegetable beds, paths or a garden boundary, and uses wood you can often cut yourself. This calculator works out the stakes, the rows of rods and the total rod length to cut.

How the calculation works

  • Stakes = fence length ÷ stake spacing, rounded down, + 1
  • Stake length = fence height + depth in the ground
  • Rows of rods = fence height ÷ rod diameter, rounded up
  • Total rod length = rows × fence length × 1.1, adding 10% for the weave going in and out
  • Rods to cut = total rod length ÷ rod length, rounded up

A fence 20 ft long and 3 ft high, with stakes every 12 in driven 18 in deep, takes 21 stakes of 4.5 ft. Woven with 1 in rods, it needs 36 rows, about 792 ft of rods, or 99 rods of 8 ft.

Choosing stakes and rods

Item Common choice
Stakes 1.5 to 2.5 in thick, chestnut, oak or hazel
Rods 0.5 to 1.5 in thick, hazel or willow
Stake spacing 10 to 18 in
Stake depth about a third of the visible height, at least 12 in

Thin, fresh rods bend easily and suit low bed edges; thicker rods make a stronger fence but need closer stakes.

How to weave it

  1. Drive the stakes in a straight line or a gentle curve, using a pilot bar in hard ground.
  2. Start at the bottom with the thick end of a rod behind a stake, then weave in front of and behind the next stakes.
  3. Start the next rod where the previous one ends and alternate the direction each row.
  4. Press each row down firmly with a mallet or your foot to close the gaps.
  5. Finish the top with a twisted rod or a binding row to lock the weave.

Season and lifespan

Cut hazel or willow in late winter, while the sap is down, and weave it within a few weeks while it is still pliable. A wattle fence usually lasts several years before the bottom rows rot; stakes of chestnut or oak last longest. Willow stakes may root and sprout, which you can trim or turn into a living fence.

Frequently asked questions

How many stakes for a 20 ft wattle fence?

With stakes every 12 in, 21 stakes; for a 3 ft fence driven 18 in deep, each is 4.5 ft long.

How many rods for a wattle fence?

A 20 ft fence 3 ft high in 1 in rods takes 36 rows, about 792 ft of rods, or 99 rods of 8 ft.

What wood is best for a wattle fence?

Hazel and willow are the most common, cut in late winter and woven fresh; chestnut makes durable stakes.

How long does a wattle fence last?

Usually 5 to 10 years for hazel, longer if it stays fairly dry.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.