Skip to content
Omnikalc

How much does it cost to replace a furnace?

Enter the furnace, the installation, the ductwork changes, the permit, the thermostat, your yearly heating bill and the old and new efficiency: get the total, the yearly savings and the payback time.

Updated on
Your inputs
$

Value out of range

$

Value out of range

$

Value out of range

$

Value out of range

$

Value out of range

$

Value out of range

%

Value out of range

%

Value out of range

Results

Total cost

$6,400

Yearly savings

$200

Payback time
32.0 years
A furnace is usually replaced because the old one fails or reaches 15 to 20 years, not for the savings alone; a heat pump can cut bills more and may qualify for tax credits and utility rebates

This calculator gives estimates for education and planning. It is not investment, tax or legal advice; for decisions about your own situation, talk to a qualified financial professional. Most gas furnaces last 15 to 20 years. When one fails in winter, the decision has to be made fast, so it helps to know the typical price ahead of time. A new high-efficiency furnace also burns less fuel than an old one, which pays back part of the cost over the years. This calculator adds the unit, the installation, the ductwork and venting changes, the permit and a thermostat, then estimates the yearly savings and the payback time.

How the calculation works

  • Total cost = furnace + installation labor + ductwork and venting changes + permit + thermostat
  • Yearly savings = yearly heating bill × (1 − old efficiency ÷ new efficiency)
  • Payback time = total ÷ yearly savings

A $3,500 furnace, $2,000 of installation, $500 of ductwork and venting, a $200 permit and a $200 thermostat cost $6,400. Moving from 80% to 96% efficiency on a $1,200 heating bill saves $200 a year, a payback of 32.0 years on the whole system.

Typical prices

Item Typical price
80% AFUE gas furnace, installed $3,000 to $6,000
95% to 98% AFUE gas furnace, installed $4,500 to $9,000
Electric furnace, installed $2,000 to $5,000
PVC venting for a condensing furnace $300 to $1,500
Ductwork repair or modification $500 to $3,000
Smart thermostat $150 to $300

Reading the payback

The payback looks long because the calculator counts the whole price, but you usually have to replace a dead furnace anyway. The fairer comparison is the extra cost of a high-efficiency model over a basic one: if that difference is $1,500, the $200 savings repay it in about 7.5 years. Efficiency matters more in cold climates with large heating bills.

Other options

A heat pump heats and cools, can lower bills further in moderate climates and may qualify for federal tax credits and utility rebates. A dual-fuel system pairs a heat pump with a gas furnace for the coldest days. Whatever you choose, get the system sized with a Manual J load calculation rather than matching the old unit, and ask for at least three quotes including the warranty terms.

Frequently asked questions

How much does it cost to replace a furnace?

About $6,400 for a $3,500 furnace with installation, venting, a permit and a thermostat.

How much can a high-efficiency furnace save?

Going from 80% to 96% efficiency on a $1,200 heating bill saves about $200 a year.

How long does a furnace last?

Usually 15 to 20 years with yearly maintenance.

Should I consider a heat pump instead?

Often yes, especially in moderate climates, and it may qualify for tax credits and rebates.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.