Skip to content
Omnikalc

Rain load calculator: load on a roof when the primary drain is blocked

Enter the roof area, the design rainfall, the static head and the width of the secondary scupper to get the design flow, the hydraulic head, the total water depth and the rain load on the roof.

Updated on
Your inputs
ft²

Value out of range

in/h

Value out of range

in

Value out of range

in

Value out of range

Results

Rain load on the roof

35.0 psf

Design flow of the secondary drain
332 gpm
Hydraulic head over the scupper
4.72 in
Total water depth on the roof
6.72 in

The rain load calculator gives the design flow, the hydraulic head, the total water depth and the rain load R on a roof with a blocked primary drain, from the roof area, the rainfall intensity and the size of the secondary scupper, with the ASCE 7 equation.

How the calculation works

  • Enter the roof area drained by the secondary (overflow) scupper and the design rainfall intensity of the 100-year, 1-hour storm.
  • Enter the static head, which is the height of the secondary scupper above the primary drain, and the width of the scupper.
  • The calculator finds the design flow, the hydraulic head over the scupper with a weir equation, the total water depth and the rain load R = 5.2 (ds + dh) of ASCE 7.

Example

A roof of 8,000 ft² drains to a secondary scupper of 12 in of width, placed 2 in above the primary drain, for a rainfall of 4 in/h. The flow is 4 × 8,000 / 43,200 = 0.741 cfs, or 332 gpm. The weir head is (0.741 / (3 × 1))^(2/3) × 12 = 4.72 in. The total depth of water is 2 + 4.72 = 6.72 in, and the rain load is 5.2 × 6.72 = 35.0 psf.

Why it matters

The calculator helps structural engineers, architects, plumbing designers and building owners to estimate the load of the water that can pile up on a flat roof, to size the secondary scuppers and to decide if the roof structure needs a check for the ponding.

Good to know

Place the secondary scuppers as low as possible and far from the primary drains. Keep the static head low, use a wide scupper, and check the roof framing for the load R with a stiffness that avoids the ponding instability. Keep the drains clean, especially before the rainy season.

The roof scupper sizing calculator sizes the scuppers, the downspout calculator sizes the leaders, the roof snow load calculator gives the snow load and the rational method calculator gives the runoff flow.

Frequently asked questions

What is the rain load on a roof?

If the primary drains of a roof are blocked, the water can pile up on the roof until it flows out through the secondary (overflow) drains or scuppers. The weight of this water is the rain load R, and the roof structure must resist it. ASCE 7 chapter 8 gives R = 5.2 (ds + dh) in psf, where ds is the static head, the depth of water up to the inlet of the secondary drain, and dh the hydraulic head, the additional depth needed to pass the design flow.

How is the hydraulic head found?

The calculator takes the design flow as the rainfall intensity times the roof area and finds the head over the scupper with the weir equation Q = 3.0 b h^(3/2) in feet and cfs. In SI units, the coefficient is 1.66 for m and m³/s. A wider scupper gives a lower head and a lower load. The building code gives the rainfall intensity of the 100-year, 1-hour storm for the site.

Why is ponding important?

A roof that is deflected by the weight of water has a larger depth of water, which in turn increases the deflection. This ponding instability can lead to the collapse of a flat roof with flexible framing. The roof must have enough stiffness, and the drains must be placed at the low points, with a slope of at least 1/4 in per foot (2 %) to the drains.

What are the limits of the calculator?

The calculator uses a simple weir equation for a rectangular scupper. It does not include the actual head–discharge curves of the manufacturer’s drains, the flow in the roof towards the scupper, the effect of the debris, the ponding deflection of the framing or the combination with the snow load. The drainage design must follow the plumbing code and the structural design the building code.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.