Skip to content
Omnikalc

HDD pullback force calculator: force to pull a pipe in a drilled bore

Enter the pipe diameter, the bore length, the pipe weight, the drilling fluid, the friction and the safe pull force to get the net weight, the friction, the fluid drag, the total pullback and the ratio.

Updated on
Your inputs
in

Value out of range

ft

Value out of range

lb/ft

Value out of range

Value out of range

lb

Value out of range

Results

Total pullback force

20,019 lb

Net weight per foot (upward or downward)
43.4 lb/ft
Friction force on the bore wall
10,406 lb
Fluid drag on the pipe
9,613 lb
Ratio to the safe pull force
0.50
Safe margin on the pipe

The HDD pullback force calculator gives the net weight, the friction force, the fluid drag, the total pullback force and the ratio to the safe pull force of a pipe pulled in a horizontal directional drilling bore, from the pipe size and weight, the length of the bore and the drilling fluid.

How the calculation works

  • Enter the outside diameter of the pipe, the length of the bore and the weight of the pipe with its contents or ballast water.
  • Choose the drilling fluid, enter the friction coefficient of the bore wall and the safe pull force of the pipe from the manufacturer.
  • The calculator finds the net weight per foot, the friction and the fluid drag, the total pullback force and the ratio to the safe pull force.

Example

A pipe of 12.75 in weighs 17.5 lb/ft and is pulled in a bore of 800 ft filled with a slurry of specific gravity 1.10. The slurry displaces 62.4 × 1.10 × π/4 × 1.0625² = 60.9 lb/ft, so the net weight is 43.4 lb/ft upward. With a friction coefficient of 0.3, the friction force is 0.3 × 43.4 × 800 = 10,406 lb. The fluid drag at 0.025 psi is π × 1.0625 × 800 × 3.6 = 9,613 lb. The total pullback force is 20,019 lb, which is 0.50 of a safe pull force of 40,000 lb.

Why it matters

The calculator helps drilling contractors, utility engineers, pipeline designers and students to size the drill rig, to check the pull on a polyethylene or steel pipe, and to compare the effect of the ballast water, of the slurry weight and of the length of the bore on the pull.

Good to know

Use a full survey profile of the bore and add the capstan effect of the curves for a final design. Keep the bore clean with a good mud program, use a swivel and a pulling head rated for the load, and measure the pull force during the installation. Do not stop the pull for a long time, because the soil can settle around the pipe and the force to restart can be much larger than the force in motion.

The pipe flow velocity calculator checks the flow in the finished pipe, the buoyancy calculator gives the uplift of a floating pipe, the pipeline coverage calculator checks the depth of cover and the friction loss calculator estimates the head loss in the line.

Frequently asked questions

What is the pullback force in directional drilling?

The pullback force is the tension that the drill rig must apply to pull the product pipe through the reamed bore. It is the sum of the friction of the pipe on the bore wall, which depends on the net weight of the pipe in the slurry, and the drag of the drilling fluid on the pipe surface. The curves of the bore can add a capstan effect that increases the force a lot, and the calculator does not include it.

Why is the pipe weight in the fluid important?

The slurry is heavier than water, so an empty plastic pipe floats and presses on the top of the bore. The net weight is the difference between the weight of the pipe and the weight of the fluid it displaces. Filling the pipe with water during the pullback reduces the buoyancy and the friction, but it adds the weight of the water, and the net weight must be checked for both cases.

What is the safe pull force of a pipe?

The safe pull force depends on the material, the diameter, the wall thickness and the duration of the pull. For polyethylene pipe, the manufacturers give a value based on the tensile yield strength reduced by a factor for the time and the temperature, and for steel pipe the yield strength and the bending are checked. The pull must stay below this value, and the weak link or the breakaway swivel protects the pipe.

What are the limits of the calculator?

The calculator is a simplified estimate of the straight bore and does not include the capstan effect of the curves, the stiffness of the pipe, the hydrokinetic effects, the collapse of the bore, the soil swelling or the changes of the fluid properties. A complete design follows the ASTM F1962 method, with a profile of the bore, the stresses in the pipe and the checks of the buckling and the external pressure.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.