Skip to content
Omnikalc

Horizontal curve calculator: tangent, length, chord, external distance and stations

Enter the radius, the deflection angle and the station of the PI of a circular road curve to get the tangent length, the curve length, the long chord, the external distance, the middle ordinate and the PC and PT stations.

Updated on
Your inputs
ft

Value out of range

°

Value out of range

ft

Value out of range

Results

Tangent length T

363.97 ft

Length of the curve L
698.13 ft
Long chord LC
684.04 ft
External distance E
64.18 ft
Middle ordinate M
60.31 ft
Station of the PC (start of the curve)
2,136.03 ft
Station of the PT (end of the curve)
2,834.16 ft

A horizontal curve is the circular arc that joins two straight sections of a road or a track. The horizontal curve calculator gives the tangent length, the length of the curve, the long chord, the external distance, the middle ordinate and the stations of the PC and the PT, from the radius and the deflection angle.

How the calculation works

  • Enter the radius of the circular curve and the deflection angle Δ, the angle between the two straight tangents (the change of direction).
  • Enter the station of the PI, the point where the two tangents meet, in feet from the start of the road (for example 2500 for station 25+00).
  • The calculator gives the tangent length T = R tan(Δ/2), the length of the curve L = π R Δ / 180, the long chord, the external distance and the middle ordinate.
  • It also gives the stations of the PC and the PT, the beginning and the end of the curve, needed to stake it out.

Example

A road changes direction by Δ = 40° with a curve of 1,000 ft radius, and the PI is at station 25+00 (2,500 ft). The tangent length is 1,000 × tan 20° = 363.97 ft and the curve length is π × 1,000 × 40 / 180 = 698.13 ft. The long chord is 2 × 1,000 × sin 20° = 684.04 ft, the external distance is 64.18 ft and the middle ordinate is 60.31 ft. The curve starts at the PC, station 2,500 − 363.97 = 2,136.03, and ends at the PT, station 2,834.16.

Why it matters

The calculator helps surveyors, civil engineers, students and contractors to lay out a road, a driveway, a track or a pipeline curve, to find the points to stake out, and to check a design drawing. It replaces the tables of the old surveying handbooks.

Good to know

Check the units: the formulas work with any unit if the radius and the station use the same one. Use the deflection angle of the tangents, not the interior angle. Keep enough digits for the stations, as an error of a few hundredths of a foot over a long curve is a few centimeters on the ground.

The vertical curve calculator covers the profile of the road, the banked curve calculator gives the physics of the turn, the turning radius calculator sizes a vehicle’s turn, and the stopping distance calculator sets the sight distance needed.

Frequently asked questions

What is a horizontal curve?

A horizontal curve is the circular arc that joins two straight tangents of a road, a railway or a pipeline, to change its direction smoothly. It is defined by its radius and by the deflection angle between the tangents. The point where the curve starts is the PC (point of curvature), the point where it ends is the PT (point of tangency), and the point where the tangents meet is the PI (point of intersection).

What are the formulas?

With R the radius and Δ the deflection angle, the tangent is T = R tan(Δ/2), the length of the curve is L = π R Δ / 180, the long chord is LC = 2 R sin(Δ/2), the external distance is E = R (1 / cos(Δ/2) − 1) and the middle ordinate is M = R (1 − cos(Δ/2)). The station of the PC is the station of the PI minus T, and the PT is the PC plus L.

How do I choose the radius?

The radius depends on the design speed, the superelevation and the side friction, and it must be larger than the minimum radius of the standard. A larger radius gives a gentler curve and a higher safe speed, but it needs more land and a longer road. For a given speed, use the minimum radius calculator to find the limit, then choose a radius that is somewhat larger.

What is the arc or chord definition of the degree of curve?

In North American practice, the degree of curve is the central angle of an arc of 100 ft, so D = 5729.58 / R with R in feet. Some older plans use a chord of 100 ft instead of an arc. This calculator works with the radius directly, so it does not depend on the definition, but you can convert with the first formula.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.