Skip to content
Omnikalc

Horizontal curve staking by deflection angles calculator

Enter the radius, the deflection angle, the station of the PC and the interval to get the curve length, the PT station, the sub-arcs and the deflection angles.

Updated on
Your inputs
ft

Value out of range

°

Value out of range

ft

Value out of range

ft

Value out of range

Results

Deflection angle to the first station

0.5730 °

Length of the curve
509.64 ft
Station of the PT
1,743.64 ft
First sub-arc from the PC
16.00 ft
Deflection angle for each full station
1.7905 °
Chord of a full station
49.99 ft
Last sub-arc to the PT
43.64 ft
Number of full stations
10

The horizontal curve staking calculator gives the length of the curve, the PT station, the first and last sub-arcs, the deflection angles from the PC to the first station and to each full station, the chord of a station and the number of full stations.

How the calculation works

  • Enter the radius and the deflection angle of the curve, the station of the PC and the station interval.
  • The calculator finds the length of the curve and the station of the PT.
  • It gives the sub-arcs, the deflection angles for the first and for each full station, the chord and the number of stations.

Example

A curve of radius 800 ft and deflection angle 36.5° starts at station 12+34 (1,234 ft). Its length is π × 800 × 36.5 / 180 = 509.64 ft, so the PT is at 1,743.64 ft (17+43.64). With stations every 50 ft, the first is at 12+50, a sub-arc of 16.00 ft with a deflection of 90 × 16 / (π × 800) = 0.5730°. Each full station adds 1.7905°, for a chord of 49.99 ft. There are 10 full stations and a last sub-arc of 43.64 ft.

Why it matters

The calculator helps surveyors, road and site engineers, students and layout crews to prepare the field book of a circular curve, to check the closing deflection at the PT and to stake a curve with a transit or a total station.

Good to know

Compute the deflection angles of all the stations and check that the last one is half of the deflection angle of the curve, since this catches errors in the arithmetic. Measure the chords with a tape under tension and corrected for slope, and stake the PT to check the closure. For a curve that is staked from a station in the middle, set up a second time and orient with the tangent.

The horizontal curve calculator gives the tangent, the external distance and the long chord, the spiral curve length calculator gives the transition, the vertical curve calculator gives the profile and the minimum curve radius calculator gives the radius for a design speed.

Frequently asked questions

What is staking by deflection angles?

To stake a circular curve, the surveyor sets up the transit at the PC, turns off the deflection angle to each station on the curve and measures the chord from the last point. The deflection angle from the tangent to a point on the curve is half of the central angle of the arc to that point, and it is 90 l / (π R) in degrees for an arc of length l and a radius R. The total deflection to the PT is half of the deflection angle of the curve.

Why are there sub-arcs?

Stations are set at whole multiples of the interval, but the PC is rarely at one. The first station is therefore a short sub-arc from the PC, and the last point, the PT, is a short sub-arc past the last whole station. The deflection angles are computed for the arc of each piece. The sum of the first sub-arc, the full stations and the last sub-arc is the length of the curve, which gives a check, and the deflection to the PT must equal half of the deflection angle of the curve.

Arc or chord?

The calculator uses the arc definition of the stations, with the arc length measured along the curve, which is the form of the highway design and the one used with a deflection angle of 90 l / (π R). The chord of a full station is 2 R sin(δ). For a station of 50 ft on a curve of 800 ft, the chord is 49.99 ft, 0.01 ft shorter than the arc. On a sharper curve the difference is larger, so use the chord, not the arc, when you measure with a tape.

What does the calculator leave out?

The calculator does not stake the curve from a point other than the PC, or by offsets from the tangent or by coordinates, and it does not compute the spiral transitions or the compound curves. It assumes the PC station you enter, in feet without the plus sign. Check the layout with the closing deflection at the PT and the closure of the tape distances, and use the total station of a modern crew for the staking by coordinates.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.