In an attic room with sloped ceilings, the short walls along the eaves, called knee walls, hide a long triangle of space behind them. Built-in drawers, cabinets or small doors turn it into useful storage without taking any room from the living space. This calculator measures that space and the drawers that fit.
How the calculation works
- Run behind the wall = knee wall height ÷ tan(roof pitch)
- Floor area behind the wall = knee wall length × run
- Volume = knee wall length × knee wall height × run ÷ 2
- Depth at half height = run ÷ 2
- Drawers = knee wall length ÷ drawer width, rounded down
Behind a 48 in knee wall 16 ft long, under a 45° roof, the space runs 48 in back to the eaves. That is 64 sq ft of floor and about 128 cu ft of space. At half the wall height, there is still 24 in of depth, enough for drawers, and 8 drawers 24 in wide fit along the wall.
Depth by roof pitch
| Roof pitch | Run behind a 48 in knee wall |
|---|---|
| 30° | about 83 in |
| 40° | about 57 in |
| 45° | 48 in |
| 55° | about 34 in |
A shallow roof gives a deep space that is hard to reach; a steep roof gives a shallow space that suits drawers and cabinets.
Planning tips
- Find out whether the space behind the wall is inside or outside the insulation. If the insulation is in the knee wall, the space behind it is cold in winter and hot in summer, and items stored there can get damp.
- When cutting openings, keep the insulation and the air barrier continuous around the built-ins, or move the insulation to the roof slope.
- Leave access to wiring, ducts and vents that run behind the knee wall.
- Use drawers for the first 24 in of depth and a small door for long items such as suitcases further back.
- Never cut rafters or collar ties; frame the openings between the studs of the knee wall.