Skip to content
Omnikalc

Laser cutting speed estimate calculator

Enter the laser power, the material, the thickness, the kerf and the coupling efficiency to get the cutting speed, the cutting time of a contour and the energy per metre.

Updated on
Your inputs
W

Value out of range

mm

Value out of range

mm

Value out of range

%

Value out of range

m

Value out of range

Results

Cutting speed in metres per minute

3.85 m/min

Energy to melt one cubic millimetre
7.80 J/mm³
Cutting speed
64.1 mm/s
Cutting speed in inches per minute
151 in/min
Cutting time for the contour
0.5 min
Volume of metal removed per second
38.46 mm³/s
Laser energy per metre of cut
15,600 J/m

The laser cutting speed calculator gives the energy to melt the metal, the cutting speed in mm/s, m/min and in/min, the cutting time of a contour, the volume of metal removed and the laser energy per metre for a fiber laser.

How the calculation works

  • Choose the material and enter the laser power and the thickness.
  • Enter the kerf width and the coupling efficiency for mild steel.
  • Enter the length of the contour to get the cutting time.

Example

A laser of 1000 W cutting 3 mm of the chosen metal with a kerf of 0.2 mm needs 7.80 J/mm³ of metal and removes 38.46 mm³/s. The cutting speed is 64.1 mm/s, or 3.85 m/min and 151 in/min. A contour of 2 m takes 0.5 min and uses 15,600 J/m.

Why it matters

The calculator helps workshops that buy a laser cutter or an outside cutting service, designers who need an idea of the cost of a part and makers who want to check that the quoted speed is realistic.

Good to know

Treat the result as a starting point for trials. Real machines slow down at corners, small holes and the start of a cut, so the time for a part is longer than the contour length divided by the speed, often by 20 to 50 %. Add the piercing time for each hole, 0.5 to 3 seconds. The coupling efficiency of mild steel with oxygen is the reference, and the values for other metals are scaled from it, so if you know the speed of your machine for one metal, calibrate the efficiency with it. Always wear the right laser safety eyewear and follow the rules for fumes and fire.

The cutting speed calculator gives the speed of a rotating tool, the laser beam spot calculator sizes the focused beam, the 3D print cost calculator estimates another way of making parts and the tap drill size calculator helps to prepare threaded holes in the cut parts.

Frequently asked questions

How is the laser cutting speed estimated?

The calculator balances the absorbed power with the energy needed to heat and melt the metal in the kerf: v = η × P / (E × t × w), where η is the coupling efficiency, P the laser power, E the energy to melt a cubic millimetre, t the thickness and w the kerf width. For 1 kW on 3 mm of mild steel, it gives about 3.8 m/min, close to the usual speed with oxygen.

Why does the material change the result?

Metals differ in the energy needed to heat and melt them, which depends on the density, the specific heat, the melting point and the latent heat. Aluminium and copper reflect the infrared light of a fiber laser much more than steel, so less of the power is absorbed. The calculator takes this into account with a factor on the efficiency.

What is the coupling efficiency?

It is the share of the laser power that really goes into the cut. With oxygen on mild steel, the burning of the iron adds heat and makes the efficiency high, around 30 % and more, while with nitrogen on stainless steel the cut relies on the laser alone. Use a value from a trial cut of your machine to calibrate.

How accurate is this estimate?

It is a first-order estimate, good to about 30 %. The real speed depends on the assist gas and its pressure, the focus position, the nozzle, the beam quality and the quality of cut that you want. The speed also falls strongly in thick sections, where the cut gets narrower and more irregular. Always check with the cutting chart of the machine maker.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.