Skip to content
Omnikalc

How wide is your laser spot at a distance?

Enter the exit beam diameter, the divergence and the distance: get the spot diameter and area, plus the diffraction-limited divergence for your wavelength.

Updated on
Your inputs

Value out of range

Value out of range

Value out of range

nm

Value out of range

Value out of range

Results

Spot diameter at the distance

153.0 mm

Spot area
183.85 cm²
Growth of the spot (spot ÷ exit diameter)
51.0 ×
Diffraction-limited divergence for this beam
0.303 mrad
A good beam, several times the diffraction limit
Spot diameter if the beam were diffraction-limited
33.3 mm

A laser beam looks like a straight line, but it widens slowly with distance. How fast it spreads is given by its divergence, an angle that is measured in milliradians. This calculator gives the diameter and area of the spot at a chosen distance from the exit diameter and the divergence, and compares your beam with the best that physics allows for its wavelength: the diffraction limit.

How the calculation works

  • Spot diameter = exit diameter + divergence × distance
  • Spot area = π × (diameter ÷ 2)²
  • Diffraction-limited divergence θ = 4 × λ × M² ÷ (π × exit diameter)
  • Growth = spot diameter ÷ exit diameter

Example

A red laser pointer has a beam of 3 mm at the exit, a divergence of 1.5 mrad, a wavelength of 650 nm and M² of 1.1. At 100 m, the spot is 153 mm wide, with an area of 183.9 cm², which is 51 times the exit diameter. The best possible divergence for such a beam is 0.304 mrad, and the spot would then be only 33 mm.

Where it is used

The calculation matters for laser pointers, surveying, lidar, laser rangefinders, free-space optical links and astronomy guide stars. Designers choose the exit diameter and the optics to get the spot size they need at the working distance. A beam expander reduces the divergence by the same factor as it enlarges the beam, so a 10× expander cuts it by 10.

Good to know

The formulas apply in the far field, where the beam spreads at a constant angle. Close to the exit, near the beam waist, the spot does not follow a straight cone. Atmospheric turbulence, fog and dust spread and scatter the beam further. Divergence is usually given as a full angle for the 1/e² diameter, so check that your data sheet uses the same definition. Powerful lasers are hazardous to the eyes and to aircraft, and laws limit their use.

For how the apparent size of an object depends on distance, use the angular size calculator. The inverse square law calculator covers how intensity falls with distance, and the Beer-Lambert calculator covers absorption in a medium.

Frequently asked questions

How fast does a laser beam spread?

By its divergence: the spot grows by the divergence angle times the distance. A divergence of 1.5 mrad means the spot widens by 1.5 mm every metre, or 150 mm over 100 m.

What limits how narrow a laser beam can be?

Diffraction. A Gaussian beam of diameter D0 and wavelength λ cannot diverge by less than 4 × λ ÷ (π × D0) in full angle. A wider beam at the exit spreads less.

What is the M² factor?

A measure of the beam quality: 1 is a perfect Gaussian beam, and higher values spread proportionally faster. Single-mode lasers have M² close to 1.

How do I get a smaller spot far away?

Expand the beam with a telescope before sending it out: the wider the beam leaves the laser, the smaller its divergence, and the smaller the spot at long range.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.