Skip to content
Omnikalc

Metal stud wall framing quantity calculator

Enter the length and the height of the wall, the stud spacing, the corners and the openings to get the number of studs, the pieces of track and the screws.

Updated on
Your inputs
ft

Value out of range

ft

Value out of range

Value out of range

Value out of range

ft

Value out of range

Results

Number of studs

51

Total length of studs
459.0 ft
Pieces of track
8
Screws to fix the studs to the track
204

The metal stud wall framing calculator gives the number of studs, their total length, the pieces of track and the screws that fix the studs to the track, from the length and the height of the wall, the stud spacing, the corners and the openings.

How the calculation works

  • Enter the length and the height of the wall and choose the stud spacing.
  • Enter the number of corners and wall ends, the number of openings and the length of a piece of track.
  • The calculator finds the number of studs, their total length, the pieces of track and the screws.

Example

A wall of 40 ft with studs at 16 in. needs 40 × 12 / 16 = 30 spaces and 31 studs. The 4 corners add 2 studs each, that is 8, and the 3 openings add 4 studs each, that is 12, for a total of 51 studs. At 9 ft they make 459 ft of studs. The track at the top and the bottom is 2 × 40 = 80 ft, that is 8 pieces of 10 ft, and the studs need 51 × 4 = 204 screws.

Why it matters

The calculator helps drywall and framing contractors, estimators, builders and DIY builders to order the studs and the track for a partition of light gauge steel, to compare the spacing of 12, 16 and 24 in. and to plan the delivery of the materials.

Good to know

Set the studs 16 in. on center for a wall that carries a heavy finish such as tile, and 24 in. when the board is thick enough and the height is low. Cut the studs 3/8 to 1/2 in. short of the height of the room to fit in the track, and fix the track to the structure at 24 in. on center. Keep the open side of all the studs in the same direction and add a stud next to every door and every heavy fixture.

The drywall calculator gives the number of sheets and the compound for the board, the wall framing calculator gives the studs of a wood wall, the drop ceiling calculator gives the grid and the tiles of a ceiling and the shear wall demand calculator gives the hold-down force of a braced wall.

Frequently asked questions

How are the studs counted?

The number of studs is the length of the wall divided by the spacing, rounded up, plus one for the end. Each corner or wall end needs two extra studs to fix the board and to close the cavity, and each opening needs four extra studs, two at each side of the opening. The calculator adds these studs to the studs of the field of the wall. It is a count of the studs, to which you add the headers and the sills.

What size of studs and tracks do I use?

The size depends on the height and on the load. Partitions in a house use studs of 2 1/2 in. or 3 5/8 in. of 25 gauge, and for taller walls or for a load of wind the engineer chooses a heavier gauge and a deeper section. The track has the same depth as the studs. The calculator counts the pieces and does not give the size, which is on the plans or in the tables of the manufacturers.

How many screws are used?

The calculator counts four screws for each stud, two at the top and two at the bottom, one in each flange of the stud, on the track. The screws are of type S, 1/2 in. pan head or wafer head, for the connection of the steel. For the drywall, the screws are different, of 1 1/4 in. for a single layer, at 12 in. on center in the field and 8 in. at the edges, and you count them with the drywall.

What does the calculator leave out?

The calculator gives a quantity of studs and tracks for a straight wall. It does not include the headers of the openings, the cripple studs, the bridging, the bracing, the fire blocking, the screws for the board, the clips, the fasteners to the structure or the waste. Add 5 to 10 percent for the cuts, and get the details of the framing from the drawings.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.