Skip to content
Omnikalc

Noise Reduction Coefficient (NRC) calculator

Enter the sound absorption coefficients at 250, 500, 1000 and 2000 Hz to get the NRC, the class of the material and the absorption of a given surface.

Updated on
Your inputs

Value out of range

Value out of range

Value out of range

Value out of range

ft²

Value out of range

sabins

Value out of range

Results

Noise Reduction Coefficient (NRC)

0.70

Equivalent absorption area of the surface

275.0 sabins

Average absorption (unrounded)
0.6875
Class (0 reflective under 0.25, 1 moderate, 2 absorptive from 0.5, 3 highly absorptive from 0.8)
2
Share of the incident sound energy absorbed
69 %
Area needed to reach the target absorption
218.2 ft²

The Noise Reduction Coefficient calculator gives the NRC, the average absorption, a class of the material, the share of sound energy absorbed, the equivalent absorption area of a surface and the area needed to reach a target absorption.

How the calculation works

  • Enter the absorption coefficients at 250, 500, 1000 and 2000 Hz from the product data sheet.
  • Enter the area of the material that you plan to install.
  • Enter a target absorption to find the area needed.

Example

A material with coefficients of 0.45, 0.65, 0.8 and 0.85 has an average of 0.6875, so its NRC is 0.70, class 2, and it absorbs 69 % of the sound that hits it. An area of 400 ft² gives 275.0 sabins, and reaching 150 sabins takes 218.2 ft².

Why it matters

The calculator helps architects, acoustic consultants, interior designers, teachers and homeowners who compare ceiling tiles, wall panels and carpets from their data sheets, and who want to check how much material a room needs to control reverberation in an office, a classroom, a studio or a restaurant.

Good to know

Use the coefficients measured per the ASTM C423 or ISO 354 test method for the same mounting as in your installation, since the mounting type changes the result a lot. The NRC is a rounded average and hides the frequency dependence, so look at the full spectrum, especially in the low frequencies, for a studio or a music room. The equivalent absorption area is the coefficient times the area, in sabins, and it adds up with the other surfaces of the room in a reverberation time calculation.

The reverberation time calculator turns the absorption of the room into a decay time, the sound insulation calculator covers the transmission between rooms, the room modes calculator finds the resonances of a room and the acoustic impedance calculator describes the medium.

Frequently asked questions

What is the Noise Reduction Coefficient?

The NRC is a single-number rating of how well a material absorbs sound. It is the arithmetic average of the sound absorption coefficients measured in a reverberation room at 250, 500, 1000 and 2000 Hz, rounded to the nearest 0.05. An NRC of 0 means that the material reflects all the sound, and 1 means that it absorbs nearly all of it.

What is a good NRC?

Hard surfaces such as painted concrete or glass have an NRC of 0.00 to 0.05. Carpet is about 0.2 to 0.4, an acoustic ceiling tile 0.5 to 0.9, and a thick porous absorber or a mineral wool panel 0.9 to 1.0. For speech rooms such as offices and classrooms, an NRC of 0.7 or more is usual on the ceiling.

What are the limits of the NRC?

The NRC ignores the low frequencies below 250 Hz and the high frequencies above 2000 Hz, and two materials with the same NRC can sound very different. For a better description, use the Sound Absorption Average (SAA) over twelve one-third octave bands, or the weighted absorption coefficient αw of the ISO 11654 standard.

Can the coefficient exceed 1?

The measured coefficient of a sample in a reverberation room can slightly exceed 1 because of edge diffraction and of the test method, up to about 1.2 for some absorbers. The NRC is generally capped at 1.00 in product data. The calculator accepts values up to 1.2 and caps the share of absorbed energy at 100 percent.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.