Acoustic impedance describes how much a material resists the passage of a sound wave. When sound meets a boundary between two materials with different impedances, part of its energy bounces back and the rest goes through. The bigger the difference, the more is reflected. This explains why you hear very little of the outside from under water, and why an ultrasound probe needs gel.
How the calculation works
- Impedance Z = density × speed of sound, in rayl
- Reflected share = ((Z₂ − Z₁) ÷ (Z₂ + Z₁))² for normal incidence
- Transmitted share = 1 − reflected share
- Transmission loss = −10 × log₁₀(transmitted share), in dB
Example
Air has a density of 1.204 kg/m³ and a speed of sound of 343 m/s, so Z₁ = 413 rayl. For water, 998 kg/m³ and 1,482 m/s give Z₂ = 1.48 million rayl. The reflected share is 99.89%, so only 0.11% of the sound energy crosses the boundary: a loss of about 29.5 dB.
Where it matters
- Medical ultrasound relies on small differences in impedance between tissues to produce an image.
- Sonar and echo sounders detect objects because they reflect sound strongly.
- Loudspeaker and horn design uses shapes that match the impedance of the driver to the air.
- Soundproofing uses layers of different impedance to reflect sound back.
Limits of the formula
The formula applies to a single flat boundary and perpendicular incidence. It does not include absorption in the materials, the effect of thin layers or the angle of incidence, which add refraction and mode conversion. For layered walls, results depend on thickness and frequency, so use the figures as a first estimate.
Matching impedances
When two media have equal impedance, all the energy passes through and nothing is reflected. This is why designers add matching layers between a transducer and the body, or shape the throat of a horn: a gradual change in impedance transmits far more sound than an abrupt jump. In building acoustics, the reverse is wanted, and a heavy, dense wall next to air reflects most of the sound back to its source.