The servo inertia ratio calculator gives the load inertia reflected to the motor, the inertia ratio with and without a gearbox, the gear ratio for the fastest acceleration, the motor speed and the torque to accelerate the motor and the load.
How the calculation works
- Enter the load inertia and the rotor inertia of the motor.
- Enter the gear ratio of the gearbox, as motor turns per load turn.
- Enter the speed to reach and the time to reach it.
Example
A load of 20 kg·cm² on a motor with a rotor of 1.5 kg·cm² appears as 0.800 kg·cm² through a gearbox of 5 : 1, an inertia ratio of 0.53 : 1 instead of 13.3 : 1 without a gearbox. The best ratio for fast acceleration is 3.65 : 1. To reach 600 rpm in 0.2 s, the motor turns at 3,000 rpm and needs 0.361 N·m for the inertias alone.
Why it matters
The calculator helps machine designers, automation engineers and robot builders who size a servo motor and a gearbox for a moving load, and need to check that the inertia ratio is in the range that the drive can control.
Good to know
Convert the inertia with care: 1 kg·cm² is 0.0001 kg·m². Include the inertia of the gearbox input, the coupling and the screw or the belt in the load, because they add to the rotor side. The calculation gives the torque for the inertia only: add the friction, the gravity and the process loads, then check the peak and the RMS torque against the motor curve. Compare the motor speed with its limit, and the gearbox ratio with the maximum input speed. If the inertia ratio is high, use a lower-backlash gearbox and a stiffer coupling, and tune the drive gently.
Related tools
The moment of inertia calculator gives the inertia of a load, the gear ratio calculator handles the speeds, the planetary gear ratio calculator gives a compact gearbox and the stepper motor steps calculator sizes the steps of another motion drive.