Skip to content
Omnikalc

Planetary (epicyclic) gear ratio calculator

Enter the teeth of the sun and the ring, the fixed member, the input speed and torque to get the ratio, the output speed and torque and the planet size.

Updated on
Your inputs

Value out of range

Value out of range

rpm

Value out of range

N·m

Value out of range

%

Value out of range

Value out of range

Results

Gear ratio (input speed ÷ output speed)

4.000

Output speed
437.5 rpm
Output torque
38.80 N·m
Teeth of each planet
24.0
Tooth sum divided by the number of planets
32.00

The planetary gear ratio calculator gives the gear ratio, the output speed, the output torque, the planet teeth and the assembly check of a simple planetary set with a sun, planets and a ring.

How the calculation works

  • Enter the teeth of the sun gear and the ring gear, and choose which member is fixed.
  • Enter the input speed, the input torque, the efficiency and the number of planets.
  • The calculator applies the ratio of the chosen configuration and checks the planets.

Example

A sun of 24 teeth in a ring of 72 has planets of 24.0 teeth. The ratio is 4.000, so an input of 1750 rpm and 10 N·m gives 437.5 rpm and 38.80 N·m at the output. The tooth sum divided by the number of planets is 32.00, which must be a whole number for even spacing.

Why it matters

The calculator helps designers of gearmotors, robot joints, transmissions and winches, and students who need the speed and torque through a planetary stage.

Good to know

In practice the sign of the ratio matters: a negative ratio means that the output turns in the opposite direction. The torque is multiplied by the ratio and reduced by the losses, and the planets share it, so the load on each mesh is the torque divided by the number of planets and the radius. Check that all the gears have the same module, that the ring and sun teeth have the same parity, and that the assembly condition holds. Add the planet carrier speed to the sun speed in a compound set with two inputs, using the Willis equation. For higher ratios, stack stages in series: the ratios multiply, and the efficiencies too.

The gear ratio calculator handles a simple pair, the spur gear calculator gives the geometry of the teeth, the gear pump calculator uses gears for a flow and the worm gear efficiency calculator covers another high-ratio drive.

Frequently asked questions

How is the ratio of a planetary gear set found?

With the ring fixed, the sun as input and the carrier as output, the ratio is 1 + Zr / Zs. With the sun fixed, the ring as input and the carrier as output, it is 1 + Zs / Zr. With the carrier fixed, the ratio is −Zr / Zs and the output turns the other way. A sun of 24 teeth in a ring of 72 gives 4:1 in the first case.

How many teeth must the planets have?

For a simple set with the three members on the same axis, the planet teeth are (Zr − Zs) / 2, so the ring and the sun must have teeth of the same parity. With 24 and 72 teeth the planets have 24. The calculator shows the value so that you can check that it is a whole number.

What is the assembly condition?

The planets can be spaced evenly around the sun only if the sum of the sun and ring teeth divided by the number of planets is a whole number. With 24 + 72 = 96 teeth, three planets give 32 and the set can be assembled, while five planets give 19.2 and cannot be spaced evenly.

Why use a planetary gear set?

A planetary set splits the load among several planets, which makes it compact and strong for its torque. The input and output are on the same axis. Typical ratios range from 3:1 to 10:1 per stage, with an efficiency of 95 to 98 % per stage, and stages can be stacked for larger ratios.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.