Skip to content
Omnikalc

Shields parameter calculator: when does flowing water start to move sand and gravel?

Enter the grain size, the water depth and the slope to get the Shields parameter, the critical value and the stage of sediment transport.

Updated on
Your inputs
mm

Value out of range

ft

Value out of range

ft per 1,000 ft

Value out of range

Results

Transport stage (Shields parameter ÷ critical value)

7.2

Well above the threshold: intense transport, with grains likely in suspension
Shields parameter
0.222
Critical Shields parameter
0.0308
Bed shear stress
0.0375 lb/ft²
Shear velocity
0.139 ft/s
Dimensionless grain size D*
12.6

Flowing water drags on the sand and gravel of its bed, and when the drag is strong enough, the grains start to move. The Shields parameter calculator takes the grain diameter, the water depth and the slope, and gives the Shields parameter, the critical value, the transport stage with a plain statement, the bed shear stress, the shear velocity and the dimensionless grain size.

How the calculation works

  • Enter the grain diameter of the bed sediment, the water depth and the slope of the water surface.
  • The calculator finds the bed shear stress of a wide channel, τ = ρ g h S, and the shear velocity u* = √(τ / ρ).
  • It computes the Shields parameter, θ = τ / ((ρs − ρ) g d), the dimensionless force of the flow on a grain, with quartz grains (2,650 kg/m³).
  • It compares it with the critical Shields parameter from the formula of Soulsby and Whitehouse. When the ratio is above 1, the grains start to move.

Example

A stream has sand of 0.5 mm, a depth of 2 ft (0.61 m) and a slope of 0.3 ft per 1,000 ft. The bed shear stress is 1,000 × 9.81 × 0.61 × 0.0003 = 1.79 Pa (0.0375 lb/ft²), and the shear velocity is 0.139 ft/s (4.2 cm/s). The Shields parameter is 0.222, against a critical value of 0.031, so the ratio is 7.2: the sand moves in a strong transport.

Why it matters

The Shields parameter is the key quantity of river and coastal engineering. It answers a basic question: will this flow move this sediment? The answer is used for stream restoration, channel design, bridge scour, dam removal and for the study of how landscapes change, and the calculator makes it easy to try different grain sizes, depths and slopes.

Good to know

The calculator assumes a wide, uniform and steady flow of clear water on a bed of uniform quartz grains, and uses the depth-slope product for the shear stress. Real beds have a mix of sizes, bedforms, vegetation and bends that change the stress on the grains, and the threshold is a probability and not a sharp line. Use the result as a first check and not for the design of structures.

The Manning equation calculator gives the flow velocity in channels, the weir flow calculator covers the flow over a weir, the peak flow calculator covers the flood discharge, and the Reynolds number calculator covers the type of flow.

Frequently asked questions

What is the Shields parameter?

It is the ratio of the force of the flow on a grain on the bed to the weight of the grain under water: θ = τ / ((ρs − ρ) g d). A grain starts to move when this ratio exceeds a critical value, which depends on the grain size through the Reynolds number of the grain. It was introduced by Albert Shields in 1936.

What is the critical Shields value?

For sand, the critical value is about 0.03 to 0.06, and it rises for fine silt and for very large gravel. The classic Shields curve shows it as a function of the grain Reynolds number. The calculator uses the formula of Soulsby and Whitehouse (1997), which fits the curve well for the full range of grain sizes.

What is bedload and what is suspended load?

Bedload is made of grains that roll, slide or hop along the bed. When the flow is much stronger than the threshold, and the shear velocity exceeds the settling velocity of the grains, they are lifted into the water and carried as suspended load. The ratio of the Shields parameter to its critical value gives a rough guide to which regime applies.

How is this used in practice?

Engineers use the Shields parameter to size the stone of a riprap lining, to check if a restored stream will scour or silt up, to design stable channels and to assess the scour around bridge piers. In the field, it tells whether a given flow can flush fine sediment from a gravel bed, which matters for fish spawning.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.