Skip to content
Omnikalc

Slab shoring spacing calculator: shore load and spacing for a formed concrete slab

Enter the slab thickness, the formwork weight, the construction live load, the shore spacing and the allowable shore load to get the slab load, the total load, the load on a shore, the capacity ratio and the largest square spacing.

Updated on
Your inputs
in

Value out of range

psf

Value out of range

psf

Value out of range

ft

Value out of range

ft

Value out of range

lb

Value out of range

Results

Total design load on the formwork

155.0 psf

Dead load of the fresh slab
100.0 psf
Load on one shore
2,480 lb
Shore capacity over load
1.61
The shore can carry its load
Largest square spacing
5.08 ft

The slab shoring spacing calculator gives the load on each shore that supports the formwork of an elevated concrete slab, from the thickness, the formwork, the construction live load and the spacing, with the capacity ratio and the largest spacing of the shores.

How the calculation works

  • Enter the thickness of the concrete slab, the dead load of the formwork and the construction live load, which is at least 50 psf in ACI 347.
  • Enter the spacing of the shores in both directions and the allowable load of one shore from the manufacturer.
  • The calculator finds the dead load of the fresh slab, the total design load, the load on a shore, the ratio of the capacity to the load and the largest square spacing that the shores can carry.

Example

An 8 in slab of normal-weight concrete weighs 150 × 8 / 12 = 100.0 psf. With 5 psf of formwork and 50 psf of construction live load the design load is 155.0 psf. Shores at 4 ft by 4 ft each carry 155 × 16 = 2,480 lb. With an allowable load of 4,000 lb, the capacity is 1.61 times the load, and the largest square spacing is √(4,000 / 155) = 5.08 ft.

Why it matters

The calculator helps concrete contractors, formwork designers, site engineers and students to check the number and the spacing of the shores under a slab, to see the effect of the thickness of the slab and of the live load and to avoid an overload that could lead to a collapse. It gives a quick check before the shoring drawing.

Good to know

Use the allowable load of the shore at the height of use, since it decreases when the shore is extended. Add the loads of the concrete placing, such as the buggies and the pile of concrete, and increase the live load at the edges. Check the floors that carry the shores, and keep the shores plumb and well braced.

The concrete formwork calculator gives the area of the forms, the concrete volume calculator gives the quantity of the pour, the load combinations calculator combines design loads and the wood beam span calculator checks the joists and stringers.

Frequently asked questions

What loads do the shores carry?

The shores that support the formwork of an elevated slab carry the weight of the fresh concrete and the reinforcement, the weight of the formwork, and the construction live load of the workers, the equipment and the material storage. ACI 347 asks for a construction live load of at least 50 psf, or 75 psf if motorized carts are used. The load is carried to the floor below, or to the ground, through the shores.

How is the load on a shore found?

The design load on the formwork in psf is the sum of the weight of the slab, the formwork and the live load. The load on one shore is this pressure multiplied by the area that the shore supports, the product of the spacings in the two directions. A slab of 8 in with 155 psf of total load gives 2,480 lb on a shore at 4 ft by 4 ft.

How is the largest spacing found?

If the shores are on a square grid with the spacing s, the load on a shore is q s², and the shore is at its capacity when q s² equals the allowable load, so s = √(capacity / q). With 4,000 lb and 155 psf, the largest spacing is 5.08 ft. The stringers and joists under the plywood also limit the spacing, since they must carry the load between the shores.

What are the limits of the calculator?

The calculator checks the load of the shores only. It does not check the plywood, the joists, the stringers, the bracing, the bearing of the shores on the floor below, the effect of the load on the supporting slab, the reshoring, or the loads from the concrete placing. The allowable load of a shore depends on its height and on its extension. The shoring plan must be prepared by a qualified engineer.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.