Skip to content
Omnikalc

Spiral curve length calculator: transition length, angle and shift

Enter the design speed, the radius and the rate of change of lateral acceleration to get the minimum length of the spiral transition curve, the travel time, the spiral angle and the shift.

Updated on
Your inputs
mph

Value out of range

ft

Value out of range

ft/s³

Value out of range

Results

Minimum length of the spiral Ls

196.9 ft

Travel time on the spiral
2.68 s
Enough time to steer into the curve
Spiral angle θs
5.64 °
Shift p of the circular curve
1.61 ft

A spiral curve (clothoid) is the transition between a straight road and a circular curve, with a curvature that grows smoothly. The spiral curve length calculator gives the minimum length from the speed, the radius and the rate of change of lateral acceleration, with the travel time, the spiral angle and the shift.

How the calculation works

  • Enter the design speed and the radius of the circular curve that follows the spiral.
  • Enter the rate of change of lateral acceleration C: about 1 to 3 ft/s³ for highways (2 is common), and a smaller value gives a longer and more comfortable spiral.
  • The calculator gives the minimum length Ls = 3.15 V³ / (R C) of the transition curve (the Shortt formula), with V in mph, R in feet and C in ft/s³.
  • Read the travel time, the spiral angle θs = Ls / (2R) and the shift p = Ls² / (24 R) used to set the spiral out.

Example

A curve of 1,000 ft radius is designed for 50 mph with C = 2 ft/s³. The minimum length of the spiral is 3.15 × 50³ / (1,000 × 2) = 196.9 ft. A vehicle at 50 mph (73.3 ft/s) takes 2.68 s to travel it, more than the 2 s minimum. The spiral angle is 28.65 × 196.9 / 1,000 = 5.64° and the shift of the circular curve is 196.9² / (24 × 1,000) = 1.61 ft.

Why it matters

The calculator helps highway and railway engineers, surveyors and students to size the transition curves of a road, a ramp or a track, and to check the length of a design. It gives the comfort criterion that the standards require, with the numbers for the layout.

Good to know

Use the longer of the length for the comfort and the length for the superelevation runoff. Increase the spiral if the travel time is below 2 s. For small curves with a long radius, the spiral may be unnecessary, since the shift is small, and the standards give a limit radius above which it is not required.

The vertical curve calculator covers the road profile, the banked curve calculator gives the physics of the turn, the grade curve calculator handles the slopes, and the turning radius calculator sizes the turn of a vehicle.

Frequently asked questions

What is a spiral curve?

A spiral, or transition curve (a clothoid), is a curve with a radius that changes continuously from infinity at the tangent to the radius of the circular curve. Without it, a driver would have to turn the wheel suddenly at the start of the circle and the lateral acceleration would jump. The spiral lets the lateral acceleration and the superelevation increase smoothly, for the comfort and the safety.

What is the Shortt formula?

It gives the length from the comfort criterion: the lateral acceleration V² / R must grow at a limited rate C, so that Ls = V³ / (C R). With V in mph, R in feet and C in ft/s³, the length is Ls = 3.15 V³ / (R C). In metric units, with V in km/h, R in meters and C in m/s³, it is Ls = 0.0214 V³ / (R C). This is the minimum length. Standards also set a minimum from the superelevation runoff.

What value of C should I use?

AASHTO suggests 1 to 3 ft/s³ for highways, and 2 ft/s³ is common. A railway uses a much lower value, such as 0.3 to 0.6 ft/s³ for passenger comfort, and so has longer spirals. In metric practice, 0.3 to 0.6 m/s³ is typical for roads, and a lower C gives a longer spiral and a smoother curve.

How are the angle and the shift used?

The spiral angle θs = Ls / (2R) is the change of direction along the spiral. The shift p = Ls² / (24 R) is the distance that the circular curve is moved inward to make room for the spiral. They are the main values to compute the tangent distance of the spiral-curve-spiral layout. The calculator uses the usual approximations, valid for the small angles of roads.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.