Skip to content
Omnikalc

Welded wire mesh sheets for a slab calculator

Enter the size of the slab, the size of the sheets, the lap, the waste and the style of the mesh to get the net coverage, the number of sheets and the weight.

Updated on
Your inputs
ft

Value out of range

ft

Value out of range

ft

Value out of range

ft

Value out of range

in

Value out of range

%

Value out of range

Results

Number of sheets

24

Area of the slab
960 ft²
Net coverage of one sheet
42.75 ft²
Weight of the mesh
504 lb

The welded wire mesh calculator gives the net coverage of a sheet, the number of sheets needed for a slab and the weight of the mesh, from the size of the slab, the size of the sheets, the lap, the waste and the style of the mesh.

How the calculation works

  • Enter the length and the width of the slab.
  • Enter the size of the sheets, the lap, the waste and the style of the mesh.
  • The calculator finds the net coverage of a sheet, the number of sheets and the weight of the mesh.

Example

A slab of 40 ft by 24 ft has an area of 960 ft². A sheet of 5 ft by 10 ft with a lap of 6 in covers (5 − 0.5) × (10 − 0.5) = 42.75 ft² net. The slab needs 960 / 42.75 = 22.5 sheets, and with 5 percent of waste 23.6, rounded up to 24 sheets. Of the 6x6-W2.9xW2.9 mesh, which weighs 42 lb per 100 ft², the sheets weigh 24 × 50 × 0.42 = 504 lb.

Why it matters

The calculator helps concrete contractors, builders, homeowners and estimators to order the right number of sheets for a slab on grade, a driveway or a patio, to compare the styles of mesh by weight and to plan the delivery and the handling of the sheets on the job.

Good to know

Order the sheets in the size that your supplier stocks, and lay them with the laps staggered so that four corners never meet at the same point. Tie the laps with wire, set the mesh on chairs and check its height before the pour. Cut the mesh with bolt cutters and keep the offcuts for the edges. Add one or two sheets to the order if the slab has many corners, curves or openings.

The rebar chair spacing calculator gives the chairs that hold the mesh, the concrete volume calculator gives the quantity of concrete for a slab, the rebar calculator gives the bars for a footing or a wall and the slab joint spacing calculator gives the layout of the control joints.

Frequently asked questions

What does the name of the mesh mean?

A style such as 6x6-W2.9xW2.9 gives the spacing of the wires in inches, 6 in in each direction, and the size of the wires, W2.9 meaning a wire with a section of 0.029 in². Larger numbers mean heavier wire and more steel per foot. Slabs on grade often use 6x6-W1.4xW1.4 or 6x6-W2.9xW2.9, and the engineer chooses the style from the shrinkage and temperature steel that the slab needs.

How much should the sheets lap?

Sheets are lapped by at least one mesh plus 2 in, which is 8 in for 6 in meshes, or by the lap that the engineer states. Many builders use 6 in as a minimum for slabs on grade. The calculator uses the lap you enter to reduce the area that each sheet covers, so a longer lap gives more sheets. Wire in rolls laps in the same way and is simpler to place on large slabs.

Where should the mesh be in the slab?

Mesh is only useful in the upper part of the slab, in the top third, where it controls the cracks from shrinkage. It does not work when it rests on the ground, so it must be held on chairs or on bolsters, and it must be pulled up during the pour. The cover of the mesh is checked with the thickness of the slab, and a mesh laid on the sub-base brings no help.

What does the calculator leave out?

The calculator computes a number of sheets by area, with a waste factor. It does not include the extra mesh at the edges, at the corners and around openings, the chairs, the tie wire or the extra steel that a thick slab or a heavy load needs. For a structural slab, follow the reinforcement of the drawings and count the bars separately.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.