Skip to content
Omnikalc

Rebar chair quantity calculator: spacing, chairs per mat and boxes

Enter the slab size, the chair spacing, the number of mats, the waste, the chairs per box and the price to get the chairs per mat, the chairs to order, the boxes and the cost.

Updated on
Your inputs
ft

Value out of range

ft

Value out of range

Value out of range

%

Value out of range

Value out of range

$

Value out of range

Results

Chairs to order

370

Chairs per mat
176
Boxes
2
Cost of the chairs
148.00 $

The rebar chair quantity calculator gives the chairs per mat, the chairs to order, the number of boxes and the cost of the chairs of a reinforced concrete slab, from the size of the slab, the chair spacing and the number of mats.

How the calculation works

  • Enter the length and the width of the slab and choose the chair spacing in each direction.
  • Enter the number of mats of reinforcement to support, the waste allowance, the number of chairs per box and the price of a chair.
  • The calculator finds the chairs per mat, the chairs to order, the number of boxes and the cost.

Example

A slab of 60 ft × 40 ft has chairs every 4 ft, that is ceil(60 / 4) + 1 = 16 rows and ceil(40 / 4) + 1 = 11 columns, or 176 chairs per mat. For 2 mats and a 5 % allowance, the order is 176 × 2 × 1.05 = 369.6, rounded to 370 chairs. At 250 chairs per box, that makes 2 boxes, and at $0.40 a chair the cost is $148.00.

Why it matters

The calculator helps reinforcing contractors, concrete crews, estimators and students to order the right number of chairs for a slab on grade or a suspended slab, to compare the cost of several spacings, and to avoid a lack of chairs on the day of the pour.

Good to know

Choose chairs of the right height for the cover shown on the drawings, and use plastic or concrete chairs for the slabs on grade, because steel chairs can rust at the surface. Set the chairs on a firm base, tie the bars to them, and walk on the mat only on planks. Check the cover after the placing of the bars, before the concrete is poured.

The rebar development length calculator gives the anchorage of the bars, the concrete volume calculator gives the quantity of concrete, the one-way slab minimum thickness calculator gives the thickness of a slab and the concrete vibrator spacing and capacity calculator plans the compaction of the concrete.

Frequently asked questions

What is a rebar chair?

A rebar chair is a small support, made of plastic, steel or concrete, that holds the reinforcing bars at the right height above the formwork or the ground before the concrete is placed. It keeps the concrete cover at the right depth, so that the bars are protected from corrosion and work as designed. Without the chairs, the bars sink to the bottom of the slab and the cover is lost.

How is the chair spacing chosen?

The spacing depends on the size and the stiffness of the bars, the weight of the workers and the equipment on the mat, and the specification. For a slab with bars of No. 4 to No. 6, a spacing of 3 to 4 ft in each direction is common, and a closer spacing is used for lighter bars, for a top mat that carries the traffic of the workers or for a mat of welded wire fabric. The calculator uses the spacing that you choose.

How are the chairs counted?

The chairs are placed on a grid. The number of rows is the length of the slab divided by the spacing, rounded up, plus one for the first line, and the same for the columns. The chairs of one mat are the rows times the columns, and the total is multiplied by the number of mats and by the allowance for the waste. The result is rounded up to a whole number of chairs, and then to a whole number of boxes.

What are the limits of the calculator?

The calculator gives the chairs of a rectangular slab on a regular grid. It does not include the chairs that are needed along the edges and around the openings, the continuous high chairs for the top mat, the bolsters for the beams, the spacers for the vertical bars or the extra chairs under the heavy loads. The type, the height and the strength of the chair must be chosen for the cover and the loads.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.