Skip to content
Omnikalc

How many wheelbarrow loads is that?

Enter the volume to move, the material, the wheelbarrow capacity, the most you want to push and the minutes per trip: get the volume per load, the loads, the weight and the time.

Updated on
Your inputs
cu yd

Value out of range

cu ft

Value out of range

lb

Value out of range

min

Value out of range

Results

Loads

31

Time

2.1 h

Keep the load over the wheel, lift with your legs and use planks over soft ground; two people make heavy loads safer
Volume per load
2.7 cu ft
Weight per load
200 lb
Total weight
3.0 tons

A delivered pile of soil, mulch or gravel always looks smaller than it is. This calculator turns the volume into wheelbarrow loads, taking into account both the wheelbarrow’s capacity and the weight you can safely push, and estimates the time and the total weight to move.

How the calculation works

  • Volume per load = the smaller of the wheelbarrow capacity and maximum weight ÷ material density
  • Weight per load = volume per load × density
  • Loads = volume to move ÷ volume per load, rounded up
  • Time = loads × minutes per round trip
  • Total weight = volume × density

Moving 3 cubic yards (81 cu ft) of topsoil at about 75 lb per cu ft with a 6 cu ft wheelbarrow and a 200 lb limit, each load is about 2.7 cu ft, well below the barrow’s capacity. That makes 31 loads, about 2.1 hours at 4 minutes a trip, for 3.0 tons in all.

Typical densities

Material Pounds per cubic foot
Mulch or bark about 25
Topsoil, dry about 75
Sand about 100
Gravel about 105
Wet concrete about 150

Wet material weighs noticeably more than dry. With light mulch the capacity limits the load; with sand, gravel or concrete, your strength does.

How much can you push?

Many people manage 100 to 200 lb comfortably on firm, level ground. A two-wheeled barrow is more stable with heavy loads. Uphill, on grass or on soft ground, reduce the load. Wet concrete is best carried in half loads, because it sloshes and can tip the barrow.

Working efficiently

  • Lay planks or plywood over lawn and soft ground to make a track.
  • Have the pile dropped as close to the work as possible, on a tarp to protect the lawn.
  • Fill from the side of the pile and keep the load centered over the wheel.
  • Two people with two barrows, one loading and one wheeling, move material far faster.

Safety

Lift with your legs and keep your back straight. Take breaks and drink water: 31 loads is real work. Check tire pressure before you start, since a soft tire makes every trip harder.

Delivery or bags?

For more than about a cubic yard, bulk delivery is usually cheaper than bags and saves trips from the car.

Frequently asked questions

How many wheelbarrow loads are in a cubic yard?

27 cu ft divided by the volume per load: about 11 loads at 2.7 cu ft of topsoil, rounded up.

How many loads for 3 cubic yards of topsoil?

About 31 loads at 200 lb each, roughly 2.1 hours at 4 minutes a trip.

How much does a wheelbarrow of gravel weigh?

About 105 lb per cubic foot, so a full 6 cu ft barrow would be over 600 lb: fill it partly.

How much can a person push in a wheelbarrow?

Many people manage 100 to 200 lb on firm, level ground; less uphill or on grass.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.