Skip to content
Omnikalc

How much does a whole-house fan cost, and how much can it save?

Enter the fan, the attic venting, the installation and the wiring, then the air conditioning hours it replaces, the AC and fan power and your electricity rate: get the total cost, the yearly savings and the payback time.

Updated on
Your inputs
$

Value out of range

$

Value out of range

$

Value out of range

$

Value out of range

h

Value out of range

kW

Value out of range

kW

Value out of range

$

Value out of range

Results

Total cost

$2,200

Savings per year

$218

Payback time
10.1 years
A whole-house fan pulls cool evening air in through open windows and pushes hot air out through the attic, so it works best in dry climates with cool nights; the attic needs about 1 square foot of net free vent area per 750 CFM of fan

This calculator gives estimates for education and planning. It is not investment, tax or legal advice; for decisions about your own situation, talk to a qualified financial professional. A whole-house fan is a large fan mounted in the ceiling between the living space and the attic. With windows open in the evening, it pulls cool outdoor air through the house and pushes hot air out through the attic vents, flushing out the heat in a few minutes. In climates with cool nights it can replace many hours of air conditioning at a fraction of the electricity. This calculator adds the fan, the attic venting, the installation and the wiring, then estimates the yearly savings and the payback time.

How the calculation works

  • Total cost = fan + attic venting + installation + electrical wiring
  • Savings per year = AC hours replaced × (air conditioner power − fan power) × electricity price
  • Payback time = total cost ÷ savings per year

A $1,000 fan with $300 of venting, $700 of installation and $200 of wiring costs $2,200. Replacing 400 hours of a 3.5 kW air conditioner with a 0.3 kW fan at $0.17 per kWh saves about $218 a year, so the fan pays for itself in about 10.1 years.

Typical prices

Item Typical price
Standard whole-house fan $300 to $800
Quiet ducted fan with insulated damper $1,000 to $2,500
Added attic vents $200 to $800
Installation $400 to $1,200
New circuit or wiring $150 to $500

Does it suit your home

A whole-house fan works best where summer nights drop below about 75°F and the air is not very humid, such as much of the West and the mountain states. In hot, humid climates it brings in moist air and saves less. The attic needs enough net free vent area to let the air out, roughly 1 square foot per 750 CFM of fan capacity, or the fan will push hot air back into the house. Size the fan at about 2 to 3 CFM per square foot of living space for a full air change every few minutes.

Using it well

Always open windows before turning the fan on, because running it with the house closed can pull exhaust gases down a chimney or water heater flue. Run it in the evening and early morning, then close the windows and blinds to hold in the cool air during the day. Modern ducted fans are much quieter than older belt-driven models and have insulated doors that seal in winter, which avoids heat loss through the ceiling opening.

Frequently asked questions

How much does a whole-house fan cost installed?

About $2,200 for a $1,000 fan with venting, installation and wiring.

How much can a whole-house fan save?

About $218 a year when it replaces 400 hours of a 3.5 kW air conditioner.

Does a whole-house fan work in humid climates?

Less well; it suits areas with cool, dry nights.

Do I need to open windows with a whole-house fan?

Yes, always, before turning it on.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.