Skip to content
Omnikalc

Boil-off and pre-boil volume calculator

Enter the batch volume you want in the fermenter, the kettle loss, the boil time and boil-off rate, the grain bill and its absorption to get the pre-boil volume and the total, mash and sparge water.

Updated on
Your inputs
gal

Value out of range

gal

Value out of range

min

Value out of range

gal/h

Value out of range

%

Value out of range

lb

Value out of range

gal/lb

Value out of range

qt/lb

Value out of range

Results

Pre-boil volume to collect

6.63 gal

Total water needed

8.00 gal

Sparge water

3.88 gal

Hot wort volume at the end of the boil
5.73 gal
Boil-off per hour as a share of the pre-boil volume
13.6 %
Mash water
4.13 gal

The boil-off and pre-boil volume calculator gives the pre-boil volume that you must collect to reach your batch size, together with the hot wort volume, the total water, the mash water and the sparge water, from the boil-off rate, the shrinkage and the grain absorption.

How the calculation works

  • Enter the batch volume you want in the fermenter and the loss in the kettle.
  • Enter the boil time, the boil-off rate and the shrinkage on cooling.
  • Enter the grain bill, its absorption and the mash thickness, then read the volumes.

Example

To fill 5 gal into the fermenter, with a loss of 0.5 gal in the kettle, you need 5.73 gal of hot wort at the end of the boil. With a boil-off of 0.9 gal/h over 60 min, you collect 6.63 gal before the boil, which evaporates 13.6 % per hour. The grain absorbs some water, so the total is 8.00 gal: 4.13 gal for the mash and 3.88 gal for the sparge.

Why it matters

The calculator helps homebrewers who plan an all-grain brew day and want to hit their batch volume and gravity, set the right amount of water at the start, or scale a recipe to a new kettle with a different boil-off rate.

Good to know

Measure your own boil-off rate with a test boil of plain water at your normal burner setting, and note the loss in the kettle after a few brews. The values change with the kettle, the lid, the weather and the vigor of the boil. Use the same units for all volumes. A longer boil needs more water, and a more vigorous boil concentrates the wort faster. The absorption of the grain varies with the crush and the method, and a squeezed bag loses less. Adjust the values after each brew to get closer to the target volume.

The strike water temperature calculator sets the mash temperature, the brewhouse efficiency calculator checks your yield, the homebrew ABV calculator estimates the alcohol and the beer bitterness calculator sets the hops.

Frequently asked questions

What is the boil-off rate?

It is the volume of water that evaporates from the kettle each hour of boiling. It depends on the size and shape of the kettle, the power of the burner, the surface of the liquid and the weather. A typical homebrew system loses between 0.5 and 1.25 gallons per hour, or roughly 8 to 18 percent of the volume. Measure yours with a boil of plain water.

Why include the shrinkage?

Hot wort takes more room than cold wort. When it cools to fermentation temperature, the volume shrinks by about 4 percent. If you measure the hot wort in the kettle, you have to start from a larger volume to get the batch size you want in the fermenter. The calculator works backwards from the cold batch to the hot volume.

How much water does the grain absorb?

The husk and starch of the grain keep water after the mash, about 0.12 to 0.15 gallons per pound, or 1 to 1.2 liters per kilogram. This water stays in the spent grain and is lost to the batch. The total water must include it, otherwise you collect less wort than planned.

How is the water split between the mash and the sparge?

The mash water is the grain weight times the mash thickness, typically 1.25 to 2 quarts per pound. The rest of the total is the sparge water, used to rinse the sugars out of the grain bed. In a no-sparge method the entire volume is put in the mash, and the sparge water is zero.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.