Skip to content
Omnikalc

Freight class calculator: what class does your shipment fall in?

Enter the dimensions, number of pieces and weight of a shipment to get its density and an estimated LTL freight class.

Updated on
Your inputs
in

Value out of range

in

Value out of range

in

Value out of range

Value out of range

lb

Value out of range

Results

Estimated freight class

85.0

Density of the shipment
12.19 lb/ft³
Total volume of the shipment
106.67 ft³
Density at which the class would drop
13.5 lb/ft³
Volume reduction needed to reach the next lower class
9.7 %

LTL carriers price a shipment by its class, and the class depends on density. The freight class calculator takes the dimensions of one piece, the number of pieces and the total weight, and gives the estimated freight class, the density, the total volume, the density at which the class would drop and the volume reduction needed to reach it.

How the calculation works

  • Enter the length, width and height of one piece, such as a pallet, in inches, the number of identical pieces and the total weight of the shipment in pounds.
  • The calculator finds the total volume in cubic feet, length × width × height ÷ 1,728 × pieces, and the density, the weight divided by the volume in pounds per cubic foot.
  • The density is looked up in a density scale to give an estimated freight class from 50 for dense, easy-to-ship goods to 400 for light, bulky ones.
  • The result also shows the density at which the class would drop and the volume reduction that would be needed to reach it.

Example

Two pallets of 48 × 40 × 48 inches weigh 1,300 lb in total. The volume is 2 × 92,160 ÷ 1,728 = 106.67 ft³, so the density is 1,300 ÷ 106.67 = 12.19 lb/ft³. On the density scale this falls between 12 and 13.5, which gives an estimated freight class of 85. The class would drop to 77.5 at 13.5 lb/ft³, which needs a 9.7 % smaller volume.

Why it matters

Shippers use the density to get a quote estimate before calling a carrier, to compare packaging options and to check the class on a bill of lading. A wrong class can lead to reclassification charges.

Good to know

The density scale is a general guide and carriers apply their own rules and the NMFC item for the goods. Dimensions must include pallets and any overhang, and the weight is the total gross weight. Confirm the class with your carrier before shipping.

The CBM calculator gives the volume of a shipment, and the pallet load calculator counts the boxes on a pallet.

Frequently asked questions

What is a freight class?

It is a standard category, from 50 to 500, used in North America to price less-than-truckload (LTL) shipments. The class depends on density, handling, stowability and liability, and a higher class costs more per hundred pounds. The National Motor Freight Classification (NMFC) lists the class of many commodities.

How does density determine the class?

For many goods, the class is set by the density, which is the weight divided by the volume in pounds per cubic foot. Dense goods such as tools or metal parts get a low class and a lower rate, and light, bulky goods such as furniture or foam get a high class.

Is this the official class for my commodity?

No. Some commodities have a specific NMFC item number with a fixed class, or a class that depends on density bands set by the item. The result here is an estimate based on a generic density scale, and the carrier's classification applies. Check the NMFC item for your goods.

How can I lower my freight class?

Pack the goods more tightly, reduce the size of the pallet and avoid overhang, since the dimensions used by the carrier include the whole load. Even a small gain in density can take the shipment to the next lower class, so the calculator shows how much volume you would need to cut.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.