Skip to content
Omnikalc

Friendship bracelet thread calculator

Enter the finished length, the number of colors and strands per color and the pattern to get the length to cut for each strand, the total thread and the number of embroidery floss skeins to buy.

Updated on
Your inputs
in

Value out of range

Value out of range

Value out of range

in

Value out of range

yd

Value out of range

Results

Length to cut for each strand

34.0 in

Total thread

5.67 yd

Skeins of embroidery floss to buy

1

Total number of strands
6
Thread per color
0.94 yd
Share of the last skein used
65 %

The friendship bracelet thread calculator gives the length to cut for each strand, the total thread and the number of embroidery floss skeins to buy for a bracelet, from the finished length, the number of colors and strands, the pattern and the tails.

How the calculation works

  • Enter the finished length of the knotted part and the number of colors and strands of each color.
  • Choose the pattern and enter the extra at each end and the length of a skein.
  • Read the strand length, the total thread and the skeins.

Example

A knotted part of 7 in with 6 colors and 1 strand of each color makes 6 strands. The pattern needs strands of 34.0 in, which is 0.94 yd per color and 5.67 yd in all. That means 1 skeins, and the last skein is 65 % used.

Why it matters

The calculator helps crafters, camp counselors, teachers and parents who make friendship bracelets, want to cut thread without waste or running short in the middle of a pattern, and need to buy skeins for a group of bracelets.

Good to know

The factors are rules of thumb: they vary with the pattern, the thickness of the thread and how tight you knot. Make a first bracelet to calibrate the factor for your own style. Cut all the strands of the same color together so that they have the same length. For a bracelet with a repeated pattern, add the length of an extra repeat. Tie the strands at the top with a knot and secure them to a clipboard or a pillow while you work.

The paracord bracelet calculator sizes a cord bracelet, the bead count calculator plans beaded jewelry, the cross stitch calculator handles floss for embroidery and the string art calculator estimates thread.

Frequently asked questions

How long should each strand be?

A common rule is to cut each strand three to four times the finished length of the knotted part, plus the tails for the tie. A diagonal pattern or a chevron uses about four times, and patterns with many knots about five or six, because the thread wraps around the other strands in every knot. It is easier to cut too long than too short.

Why does the pattern change the length?

Each knot takes some thread, and a strand that moves across the whole width of the bracelet, like in a chevron, travels more than one that stays near an edge. A braid or twist uses little thread, while a dense knotted pattern uses a lot. These factors are rules of thumb, and tension also changes the use of thread.

What are the tails for?

Strands are folded and knotted together at the start of the bracelet, where a loop or a few inches are left for tying the bracelet on the wrist. At the end the strands are also tied and left as fringe. About 3 inches, or 8 centimeters, at each end is typical.

How many skeins do I need?

An embroidery floss skein holds around 8 meters, or 8.7 yards, of six-strand thread, and the bracelet is made with the full six strands unless you separate them. The calculator rounds up to the whole skein and shows how much of the last one is used, so you can plan more bracelets from the same skeins.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.