Skip to content
Omnikalc

Gypsum requirement for sodic soil calculator

Enter the cation exchange capacity, the current and target exchangeable sodium, the depth and the gypsum purity to get the gypsum to apply per acre or hectare.

Updated on
Your inputs
meq/100 g

Value out of range

%

Value out of range

%

Value out of range

in

Value out of range

lb/ft³

Value out of range

%

Value out of range

Results

Gypsum requirement (as applied)

1.70 tons/acre

Sodium to replace
1.95 meq/100 g
Pure gypsum (CaSO₄·2H₂O) needed
1.53 tons/acre
Calcium supplied
714 lb/acre
Years if applied at 2 tons/acre per year
0.9 years

The gypsum requirement calculator gives the sodium to replace, the gypsum requirement as applied, the pure gypsum needed, the calcium supplied and the years of treatment at a given rate, for a sodic soil, from the CEC and the exchangeable sodium.

How the calculation works

  • Enter the cation exchange capacity and the current and target ESP from a soil analysis.
  • Enter the depth to reclaim and the bulk density of the soil.
  • Enter the purity of the gypsum product.

Example

A soil with a CEC of 15 meq/100 g and an ESP going from 18 % to 5 % must lose 1.95 meq/100 g of sodium over 6 in. This needs 1.53 tons/acre of pure gypsum, or 1.70 tons/acre of a product of 90 % purity, which supplies 714 lb/acre of calcium. At 2 per year, the treatment takes 0.9 years.

Why it matters

The calculator helps farmers, soil scientists, agronomy students and landscapers who manage sodic or sodium-affected soils and want to estimate the gypsum for a reclamation plan before they ask for quotes or run a trial on a field.

Good to know

Use the CEC and the ESP from a laboratory analysis of the layer to be reclaimed, and the bulk density of that layer. The calculation assumes that the gypsum is fully effective, so field recommendations often include a factor of 1.1 to 1.3 for the efficiency, and the dissolution depends on the particle size and the water supply. Soils with free lime or a high pH need different amendments such as sulfur. The result is a first estimate, and a local agronomist should confirm it.

The lime application calculator treats acid soils, the manure application calculator sizes organic amendments, the soil unit weight calculator gives the mass of soil and the fertilizer calculator handles nutrients.

Frequently asked questions

Why is gypsum used on sodic soils?

In a sodic soil, sodium occupies a large part of the exchange sites and makes the clay disperse, which seals the surface and slows the drainage. Gypsum (calcium sulfate dihydrate) supplies calcium, which replaces the sodium on the exchange sites. The sodium is then leached below the root zone as sodium sulfate, and the soil structure improves.

How is the requirement computed?

The sodium to be replaced is the CEC times the drop in ESP: Na (meq/100 g) = CEC × (ESPcurrent − ESPtarget) / 100. Gypsum has an equivalent weight of 86 g per equivalent, so 1 meq/100 g needs 0.86 g of pure gypsum per kilogram of soil. This is multiplied by the mass of soil in the depth to be reclaimed, and divided by the purity.

What is the target ESP?

A soil is considered sodic above an ESP of about 15 percent, and sensitive crops and clay soils may show problems from 5 to 10 percent. A target of 5 to 10 percent is typical for reclamation, and it depends on the soil texture and the crop.

Does gypsum work without water?

No. The reaction needs water to dissolve the gypsum and to leach the displaced sodium below the root zone. Good drainage is essential, and the reclamation can take several years. The gypsum is often applied in several smaller doses, and mixed with the surface layer.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.