Skip to content
Omnikalc

Honey moisture calculator

Enter the refractive index of the honey and the temperature of the reading to get the water content, the fermentation risk and the water to remove to reach your target moisture.

Updated on
Your inputs

Value out of range

°F

Value out of range

lb

Value out of range

%

Value out of range

Results

Water content of the honey

19.4 %

Water to remove to reach the target

1.37 lb

Refractive index corrected to 20 °C
1.4880
Solids (sugars and others)
80.6 %
Class (0 up to 18.6 %, 1 up to 20 %, 2 above 20 %, fermentation risk)
1
Mass of honey after drying
58.6 lb

The honey moisture calculator converts the refractive index of honey, read at any temperature, into its water content, shows the solids, a fermentation risk class and the water to remove to dry a batch to your target moisture.

How the calculation works

  • Enter the refractive index from your honey refractometer and the temperature of the reading.
  • Enter the mass of honey and the target moisture.
  • Read the water content, the class and the water to remove.

Example

A refractive index of 1.488 read at 68 °F is 1.4880 at 20 degrees Celsius, which corresponds to 19.4 % of water and 80.6 % of solids, class 1. To dry 60 lb of honey down to 17.5 %, you must remove 1.37 lb of water, which leaves 58.6 lb of honey.

Why it matters

The calculator helps beekeepers, honey sellers and hobbyists who test their honey with a refractometer before extracting, bottling or selling, and who want to avoid fermentation and meet the moisture limits of their market.

Good to know

Use a refractometer made for honey or a Brix refractometer with a honey scale, and read it after the honey has reached the temperature of the instrument. The equation is an approximation with an accuracy of a few tenths of a percent, and it is consistent with the common honey tables but not identical to them. Take a sample from the middle of the container, since layers differ, and mix the sample before reading. Wet honey should not be stored warm. Dry it before it ferments, and keep it in a sealed container in a cool, dry place.

The honey harvest calculator estimates the crop and the jars, the refractometer Brix correction calculator converts readings for beer and wine, the beekeeping start cost calculator budgets a first hive and the water activity calculator relates sugar to microbial growth.

Frequently asked questions

Why measure the moisture of honey?

Honey with too much water can ferment, because wild yeasts that live in it grow when the water content is high. This gives a sour smell and foam, and spoils the honey. Ripe honey capped by the bees usually contains 16 to 18 percent water. Beekeepers measure the moisture before extracting to avoid harvesting honey that is too wet.

How does a refractometer give the moisture?

The refractive index of honey rises as the water content falls, because sugars bend light more than water. The instrument reads the index, and a table or an equation converts it to a percentage of water. This calculator uses an equation of the Wedmore type, with a correction of 0.00023 per degree Celsius for the temperature of the reading.

What is the legal limit of water?

The Codex Alimentarius and the European Union set a maximum of 20 percent, and 23 percent for heather honey. In the United States, the Grade A standard requires at most 18.6 percent. Honey sold at a higher moisture may be sold only as a lower grade or as baker’s honey, depending on the rules in your country.

Can wet honey be dried?

Yes, with a dehumidifier in a closed room. Spread the frames or put open containers in a room at about 90 to 95 degrees Fahrenheit, 32 to 35 degrees Celsius, with the dehumidifier running for a few days. The calculator gives the amount of water to remove. Do not overheat the honey, since heat damages enzymes and flavor.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.