Skip to content
Omnikalc

Soil moisture conditioning calculator: water for the compaction of a fill

Enter the fill volume, the dry unit weight, the target and delivered moisture contents, the allowance and the truck capacity to get the moisture to add, the water and the truck loads.

Updated on
Your inputs
yd³

Value out of range

pcf

Value out of range

%

Value out of range

%

Value out of range

%

Value out of range

gal

Value out of range

Results

Water to apply with the allowance

199,424 gal

Moisture to add
5.0 %
Moderate moisture correction
Water per cubic yard of fill
19.9 gal/yd³
Water truck loads
49.9

The soil moisture conditioning calculator gives the moisture to add, the water per cubic yard of fill, the total water to apply and the number of water truck loads to bring a soil to the target moisture for compaction, from the volume, the dry unit weight and the moisture contents.

How the calculation works

  • Enter the compacted fill volume, the target dry unit weight and the target and delivered moisture contents.
  • Enter the evaporation and runoff allowance and the capacity of the water truck.
  • The calculator finds the moisture to add, the water per cubic yard, the total water to apply and the truck loads.

Example

A fill of 10,000 yd³ is compacted to 112 pcf dry, which is 10,000 × 27 × 112 = 30,240,000 lb of dry soil. The soil arrives at 7 % and the target is 12 %, so 5.0 % of water must be added, that is 1,512,000 lb, or 181,295 gal. With a 10 % allowance, the water to apply is 199,424 gal, or 19.9 gal/yd³, which makes 49.9 loads of a 4,000 gal water truck.

Why it matters

The calculator helps earthwork contractors, geotechnical technicians, estimators and students to plan the water supply of a compaction job, to size the water trucks, and to see how a drier soil or a larger target changes the quantity of water to spread.

Good to know

Add the water in the borrow area or by spreading it in several passes on the lift, and mix it with a disc or a pulvermixer to get a uniform moisture. Check the moisture with a speedy test or an oven test before the compaction, and adjust the quantity of water. Do not compact a soil that is much wetter than the optimum, dry it by aeration first.

The soil compaction calculator checks the density of a fill, the dust control water truck demand calculator plans the water for a haul road, the compaction roller production calculator sizes the compaction and the earthwork swell and shrink calculator gives the volumes of soil.

Frequently asked questions

Why condition the moisture of a fill?

A soil reaches its maximum density at a given moisture content, called the optimum, when it is compacted with a given energy. If the soil is too dry, the roller cannot push the particles together, and if it is too wet, the water takes the place of the soil and the fill is soft. A good compaction therefore needs a moisture content close to the optimum, in the range allowed by the specification.

How is the quantity of water found?

The water to add is the dry mass of the soil times the difference between the target moisture and the moisture of the delivered soil. The dry mass is the compacted volume times the dry unit weight. In imperial units, the pounds of water are divided by 8.34 lb/gal to get gallons, and in metric, a kilogram of water is a liter. An allowance covers the evaporation and the runoff.

What target moisture is used?

The target comes from the compaction test of the soil, which gives the optimum moisture and the maximum dry density. The specification often allows a range, for example from 2 % below to 2 % above the optimum. For a cohesive soil, the target is often slightly above the optimum, and for a granular soil, it is at the optimum. The calculator uses the single value that you enter.

What are the limits of the calculator?

The calculator gives the water for a uniform fill. It does not take into account the rain, the change of the moisture during the haul and the spreading, the soil that is not uniform, the time needed for the water to move in a clay or the loss of water by the wind and the sun. The moisture must be checked by tests during the work, and the quantity of water is adjusted in the field.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.