Skip to content
Omnikalc

Refractometer Brix calculator: correct the final gravity of a fermented beer for alcohol

Enter the Brix readings of the wort and of the fermented beer to get the original gravity, the corrected final gravity, the alcohol by volume and the attenuation.

Updated on
Your inputs
°Bx

Value out of range

°Bx

Value out of range

Value out of range

Results

Original gravity

1.0485

Final gravity
1.0156
Alcohol by volume
4.40 %
Apparent attenuation
67.7 %

A refractometer needs just a few drops, but it cannot read the gravity of a beer that has alcohol. The refractometer Brix correction calculator takes the Brix of the wort and of the fermenting beer, applies the wort correction factor and the alcohol correction, and gives the original gravity, the final gravity, the alcohol by volume and the attenuation.

How the calculation works

  • Enter the Brix reading of the wort before the fermentation, and the Brix reading of the fermented beer. The second one is distorted by the alcohol, which is why a correction is needed.
  • Enter the wort correction factor of the refractometer, 1.04 for most (it compensates for the difference between sugar water and wort).
  • The calculator divides the readings by the factor, turns the first into the original gravity and applies a cubic correction for the alcohol to get the final gravity.
  • It then gives the alcohol by volume and the apparent attenuation.

Example

A brewer reads 12.5 °Bx before the fermentation and 7.5 °Bx after, with a factor of 1.04. The original gravity is 1.0485, the corrected final gravity is 1.0156, and the beer has 4.40 % alcohol with an apparent attenuation of 67.7 %. Without the correction for the alcohol, the final gravity would be wrong by more than 0.010.

Why it matters

The calculator helps home brewers who use a refractometer to follow the fermentation with a small sample, to know when the beer is done and to compute the alcohol without a hydrometer. It also helps to compare a Brix reading with the gravity of recipes.

Good to know

The corrections are for beer and cider with a typical alcohol, and they are less accurate for strong beers, wines, meads and worts with a high amount of non-fermentable sugars. Take the reading from a small sample cooled to the temperature of the refractometer, and wait for 30 seconds before the reading. Use the final gravity from a hydrometer if you need an exact value for the priming sugar or for the label.

The brewhouse efficiency calculator uses the original gravity, the priming sugar calculator gives the sugar for bottling, the wine sulfite calculator doses sulfites, and the maple syrup calculator uses the Brix of a syrup.

Frequently asked questions

Why can't I read the final Brix directly?

A refractometer measures the bending of light, which depends on the sugar in the liquid. After the fermentation, the alcohol also bends light differently than water, so the reading is higher than the true sugar content, and the gravity from the Brix is wrong, often by 0.008 to 0.012. To get the gravity of a beer that is fermenting or finished, you need a correction that takes the original and the current Brix.

What is the wort correction factor?

Refractometers are calibrated for sugar water (sucrose), and wort has other compounds that change the reading a little. A division of the reading by 1.04 is the usual fix. Some brewers measure the factor with their own hydrometer and enter a personal value, between 1.02 and 1.06. Choose 1.00 if you want a pure sugar-water reading.

How accurate is the cubic formula?

The correction is the cubic polynomial of Sean Terrill, fitted to many beer samples. It is accurate to about ±0.002 for beers and ciders with a typical alcohol, but it is not for a wine, a mead or a spirit that was fortified. The reading error of the refractometer itself, 0.2 °Bx, gives about ±0.001. Confirm the final gravity with a hydrometer before you bottle.

What is the apparent attenuation?

It is the share of the sugar that the yeast has used, (OG − FG) / (OG − 1), computed on the gravity and not on the real extract. Beers have an apparent attenuation of 65 to 85 %. A low value tells that the fermentation may be stuck or that the wort was rich in dextrins, and a high value, a dry beer. The alcohol is computed from the standard formula based on the two gravities.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.