Skip to content
Omnikalc

Scrunchie calculator: how big a fabric strip and how much fabric?

Enter the number of scrunchies, the elastic length and the fullness to get the size of the strips, the fabric and the elastic to buy.

Updated on
Your inputs

Value out of range

Value out of range

Value out of range

Value out of range

Value out of range

%

Value out of range

Results

Fabric to buy

0.73 yd

Length of each fabric strip
23.00 in
Width of each fabric strip
4.00 in
Strips cut across the fabric width
1
Elastic to buy
1.50 yd

A scrunchie uses very little fabric, but if you sew many for a gift or a stall, the numbers add up. This scrunchie calculator takes the number of scrunchies, the elastic length, the fullness, the tube width, the seam allowance and the fabric width to give the size of each fabric strip, how many strips fit across the fabric, the fabric to buy and the elastic to buy.

How the calculation works

  • Strip length = elastic length × fullness + 2 × seam allowance. A fullness of 2.5 means that the fabric tube is two and a half times the elastic before it is gathered.
  • Strip width = 2 × finished tube width + 2 × seam allowance, because the strip is folded in half lengthwise with the right sides together.
  • Strips across = ⌊fabric width ÷ strip length⌋, at least 1. The number of rows is the scrunchies ÷ strips across, rounded up.
  • Fabric to buy = rows × strip width × (1 + waste ÷ 100). Elastic = scrunchies × elastic length.

Example

For 6 scrunchies with 9 in of elastic and standard fullness (2.5 ×), the strip is 9 × 2.5 + 0.5 = 23 in long. A tube 1.75 in wide gives a strip width of 2 × 1.75 + 0.5 = 4 in. On 44 in fabric only 1 strip fits across, so 6 rows are needed, a length of 24 in. With 10% extra the fabric is 26.4 in, or 0.73 yd. You need 6 × 9 = 54 in, or 1.5 yd, of elastic.

Why it matters

Crafters who sell scrunchies, teachers who run a sewing class and parents who make a set of matching accessories use the numbers to buy exactly the right amount. Calculating the strip size also lets you adapt a pattern to a thicker or thinner hair tie.

Good to know

The estimate is for plain strips cut across the width of the fabric, and a directional print, a pattern to match or a cut along the grain would change the layout. A stretch fabric may need a shorter strip. The elastic length is measured before sewing and some people add a half inch for overlap. Buy a little extra for tests.

The fabric yardage calculator converts pieces to yards, the tote bag calculator plans another small sewing project and the pleated skirt calculator is for a larger garment.

Frequently asked questions

How big should a scrunchie strip be?

A standard scrunchie uses a strip about 22 to 23 inches long and 4 inches wide, with a piece of elastic about 9 inches long. The strip is sewn into a tube, turned right side out, threaded with the elastic and closed. A larger or fuller scrunchie needs a longer strip.

What does fullness mean?

Fullness is the ratio between the fabric length and the elastic length. A ratio of 2 gives a flat, light scrunchie, 2.5 a standard gathered look and 3 a full, puffy one. Lighter fabrics can handle more fullness without becoming too bulky.

How do I make a scrunchie?

Fold the strip in half lengthwise with the right sides together and sew the long edge. Turn the tube right side out, thread the elastic through with a safety pin, and sew the ends of the elastic together. Then turn in the raw edges of the fabric and close the gap with a hidden stitch.

What fabric works well?

Cotton, satin, velvet and knits are all popular. Satin and silk are gentle on hair, and velvet gives a plush look. Heavier fabrics need a bit more width, and slippery fabrics can be easier to sew with a fine needle and a smaller stitch.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.