Skip to content
Omnikalc

Tote bag calculator: how much fabric do I need for a tote bag?

Enter the size of the tote bag, the seam allowance, the handles and the fabric width to get the size of the panels and the straps and the fabric to buy.

Updated on
Your inputs

Value out of range

Value out of range

Value out of range

Value out of range

Value out of range

Value out of range

Value out of range

Value out of range

%

Value out of range

Results

Fabric to buy

1.63 yd

Width of each panel to cut
15.00 in
Height of each panel to cut
19.50 in
Panels to cut
4
Handle strip to cut, length
23.00 in
Handle strip to cut, width
6.00 in

A tote bag is one of the simplest sewing projects, but the fabric you need depends on the size of the bag, the handles and the width of the cloth. This tote bag calculator takes the finished size, the boxed bottom, the seam and hem allowances, the handle size, the lining and the fabric width to give the size of each panel, the number of panels, the handle strip and the fabric to buy.

How the calculation works

  • Panel width = finished width + 2 × seam allowance. Panel height = finished height + half the bottom depth (cut away when the corners are boxed) + a seam allowance + twice the hem fold.
  • Panels = 2 for an unlined bag and 4 for a lined bag. The number that fit across the fabric is ⌊fabric width ÷ panel width⌋, and the rows of panels are counted along the length.
  • Handle strips are cut with the finished length plus two seam allowances and a width of 4 × the finished handle width, because the strip is folded in four. Two handles are needed.
  • Fabric to buy = (rows of panels × panel height + rows of handles × strip width) × (1 + waste ÷ 100).

Example

A lined tote of 14 × 15 in with a 4 in boxed bottom, 0.5 in seams and a 1 in top hem needs panels of 15 in wide and 15 + 2 + 0.5 + 2 = 19.5 in high, 4 in all. On 44 in fabric, 2 panels fit across, so there are 2 rows, a length of 39 in. The handles are 23 in long and 6 in wide, and 1 fits across the fabric, so they take 12 in. With 15% extra, the fabric to buy is (39 + 12) × 1.15 = 58.65 in, or 1.63 yd.

Why it matters

Beginners use the numbers to cut with confidence and to avoid buying too little fabric, and experienced sewers use them to scale a pattern to a new size. Counting how many pieces fit across the width gives a better estimate than the area alone.

Good to know

The estimate assumes simple rectangular pieces cut along the grain and placed in rows. It does not include pockets, interfacing, a zipper, a patterned fabric that must be matched or a directional print. The handles are folded in four with raw edges inside, and webbing handles need no fabric. Buy a little extra for mistakes and always check the layout of your own pattern.

The fabric yardage calculator converts pieces to yards, the pleated skirt calculator plans another garment and the quilt size calculator helps with larger projects.

Frequently asked questions

How do I size the panels of a tote bag?

A basic tote is two rectangles sewn together at the sides and the bottom. Each panel is the finished width plus two seam allowances, and the height is the finished height plus the hem at the top and one seam allowance at the bottom. If the bottom is boxed, add half the depth to the height, since you cut out a square from each bottom corner.

What is a boxed bottom?

A boxed bottom gives the bag a flat base. After sewing the side and bottom seams, you cut a square from each bottom corner, and then you pull each corner open so the seams meet and you sew across. The cut-out square has sides of half the depth, so a 4 inch deep bottom uses squares of 2 inches.

How wide should the handle strips be?

A common method is to cut a strip four times the finished width, fold it in half lengthwise, press, open it, fold both edges to the center crease and fold again, then topstitch. A 1.5 inch handle needs a strip of 6 inches. Use a stronger interfacing or webbing for heavy loads.

What fabric is best?

Canvas, denim, duck cloth and upholstery fabrics are strong and hold their shape. Lighter fabrics such as quilting cotton can be used with interfacing or a lining. Wash and press the fabric before cutting, since cotton shrinks, and use a heavy needle for thick layers.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.