Skip to content
Omnikalc

Stained glass solder calculator

Enter the total seam length, the width and height of the solder bead, the alloy and the wire size to get the volume and weight of solder, the length of wire and the number of spools for a copper foil panel.

Updated on
Your inputs
in

Value out of range

in

Value out of range

in

Value out of range

in

Value out of range

lb

Value out of range

Results

Weight of solder

1.55 lb

Length of solder wire

34.2 ft

Spools to buy (rounded up)

2

Volume of solder
82.6 cm³
Area covered by the beads
580.6 cm²
Solder per length of seam
23.40 g/ft

The stained glass solder calculator gives the volume and weight of solder, the length of wire and the number of spools needed for the seams of a copper foil panel, from the total seam length, the size of the bead, the alloy and the number of sides soldered.

How the calculation works

  • Enter the total seam length of one side and the width and height of the bead.
  • Choose the alloy and the sides soldered, and enter the wire diameter and the weight of a spool.
  • Read the weight and the length of solder and the spools to buy.

Example

A panel with 180 in of seams and a bead 0.25 in wide and 0.08 in high uses 82.6 cm³ of solder, which weighs 1.55 lb. That is 34.2 ft of wire, so 2 spools are needed. The beads cover 580.6 cm², and the solder per length of seam is 23.40 g/ft.

Why it matters

The calculator helps stained glass artists, hobbyists and teachers who work with the copper foil technique and want to buy the right amount of solder for a panel, compare alloys, or price a commission before starting the work.

Good to know

Add the length of all the foiled seams: the inner lines between pieces and, if you add a border, the outside edges. Include a margin of 10 to 20 percent for the repairs, the tinning of the edges and the loss on the iron. The shape factor of 0.7 is an average, and a skilled worker with a low flat bead will use less. Work in a ventilated space and use a fume extractor, particularly with flux. Lead is toxic, so keep food and children away from the workshop.

The kite calculator treats another craft project, the string art calculator estimates thread, the glaze batch calculator mixes glazes and the hexagon quilt calculator plans pieces.

Frequently asked questions

How much solder does a panel need?

The solder needed depends on the length of seams, the width and height of the bead, and the number of sides soldered. A bead 1/4 inch wide and 1/16 inch high uses about 0.65 ounce per foot of seam on each side, or 60 grams per meter. A panel with 15 feet of seams soldered on both sides needs roughly a pound.

How is the bead volume estimated?

The calculator treats the bead as a rounded profile with a shape factor of 0.7 times the width times the height. The real value depends on the technique and the foil, and a flat tinned bead uses less than a high rounded one. Measure a finished seam to get your own width and height.

Which alloy is best?

A 60/40 tin-lead solder flows easily and gives a smooth, bright bead, but it contains lead and needs careful handling. Lead-free solders are lighter, around 7.4 g/cm³, but they flow less easily and need more heat. Never eat, drink or smoke while soldering, and wash your hands afterward.

What other materials does the panel need?

Besides solder, a copper foil panel needs flux to clean the foil, a patina to color the lines if wanted, and a finishing wax or polish. A panel is often framed with zinc or lead came, which has to be soldered at the corners and counted separately.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.