An electric kettle is one of the most efficient ways to heat water, but it uses a lot of power for a few minutes many times a day. This calculator works out the energy and cost of each boil, the yearly cost, the time to boil, and how much you save by boiling only the water you need.
How the calculation works
- Energy per boil = mass of water × 4,186 J/kg·°C × temperature rise ÷ efficiency ÷ 3,600,000
- Yearly energy = energy per boil × boils per day × 365
- Time to boil = energy per boil ÷ kettle power
Boiling 32 fl oz of water from 59°F to boiling uses about 0.110 kWh with an 85% efficient kettle. Four boils a day add up to about 161 kWh a year, or $27.31 at $0.17 per kWh. A 1,500 W kettle takes about 4.4 minutes. If you only need 16 fl oz each time, boiling just that saves about $13.66 a year.
Why boiling less saves the most
The energy is almost exactly proportional to the amount of water. Filling the kettle to the top for a single cup can waste most of the energy. Use the minimum line, or measure the water with your cup.
Other ways to save
- Descale regularly: limescale on the element slows heating and wastes some energy.
- Keep the lid closed while it heats.
- Use the warm setting of a variable-temperature kettle for green tea or coffee, which need less than boiling.
- Do not reboil water that has cooled; plan to use it while it is hot.
Kettle, stove or microwave?
An electric kettle puts most of its energy into the water, more than a pot on an electric or gas stove, where much of the heat escapes around the pan. A microwave can be efficient for a single small cup, but is slower for larger amounts.
Power and time
US kettles usually draw up to about 1,500 W, because of the standard 120 V outlets, while kettles in countries with 230 V power can reach 2,000 to 3,000 W and boil faster. Higher power does not use more energy for the same water: it simply delivers it faster.