Skip to content
Omnikalc

Machine capacity calculator: how many machines does your demand require?

Enter demand, cycle time, shifts, working days and OEE to get the machine hours required, the number of machines and the utilization.

Updated on
Your inputs
units

Value out of range

seconds

Value out of range

hours

Value out of range

Value out of range

Value out of range

%

Value out of range

%

Value out of range

Results

Machines to install

2

Utilization with that many machines

83.3%

Healthy but limited headroom
Machine hours required per year
6,667
Hours available per machine
4,000
Machines needed (exact)
1.67
Spare capacity in units per year, up to the utilization ceiling
32,000

Before you buy equipment, you need to know how many machines the demand really requires. This machine capacity calculator converts your annual demand and cycle time into the machine hours needed, adjusts for OEE, compares them with the hours one machine offers and shows the number of machines to install, the resulting utilization and the spare capacity.

How the calculation works

  • Hours required = annual demand × cycle time ÷ 3,600 ÷ OEE.
  • Hours available per machine = hours per shift × shifts per day × working days.
  • Machines needed (exact) = hours required ÷ hours available.
  • Machines to install = hours required ÷ (hours available × maximum utilization), rounded up.
  • Utilization = hours required ÷ (machines × hours available).

Example

A product has demand of 400,000 units a year with a 45 second cycle and 75 % OEE, so it needs about 6,667 machine hours. One machine offers 4,000 hours (8 hours, 2 shifts, 250 days), so the exact need is 1.67 machines. With a 90 % utilization ceiling you install 2 machines, running at 83.3 %, with room for about 32,000 more units a year up to the 90 % ceiling.

Why it matters

Buying too few machines creates bottlenecks and overtime, and buying too many ties up capital in idle equipment. A simple capacity check ties the decision to demand, cycle time and efficiency, and shows the effect of adding a shift, improving OEE or cutting the cycle time, which are often cheaper than another machine.

Good to know

Use a realistic cycle time that includes loading, unloading and any regular manual steps, and an OEE measured on the same machine type. Include planned maintenance by lowering the working days or hours. For several products, add up their hours before you round up. The planning utilization sets the buffer you keep for growth, and a bottleneck machine should usually stay lower than a non-critical one. If demand is seasonal, size for the peak or plan overtime and inventory builds.

The labor productivity calculator measures output per hour, the team capacity calculator plans sprint hours, and the server capacity calculator sizes IT servers with a similar approach.

Frequently asked questions

How do I calculate machine capacity?

Divide the machine hours that the demand needs by the hours one machine can run in a year, after adjusting for efficiency losses such as downtime and slow running.

Why include OEE?

Machines rarely run at ideal speed all the time. Dividing by OEE converts the ideal hours into the real hours that the demand needs.

Why plan below 100 percent utilization?

Demand varies and machines break down. Planning below about 85 to 90 percent leaves room for peaks and maintenance.

What if I add a shift instead of a machine?

Increase the shifts per day and compare the extra labor cost with the cost of another machine.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.