Skip to content
Omnikalc

Atwood machine calculator

Enter the two masses, the mass of the pulley and the drop height to get the acceleration, the tension on each side and the time and speed after the fall.

Updated on
Your inputs
kg

Value out of range

kg

Value out of range

kg

Value out of range

m

Value out of range

Results

Acceleration

2.377 m/s²

Tension in the string of the heavier mass
37.15 N
Tension in the string of the lighter mass
36.55 N
Time to travel the drop height
0.92 s
Speed at the end of the drop
2.18 m/s
Acceleration with an ideal pulley
2.452 m/s²

The Atwood machine calculator gives the acceleration, the tension on each side, the time and the speed after a drop for two masses linked by a string over a pulley, with the option of a pulley that has its own mass.

How the calculation works

  • Enter the heavier mass and the lighter mass.
  • Enter the mass of the pulley, taken as a solid disc, or 0 for an ideal one.
  • Enter the drop height.
  • The calculator gives the acceleration, the two tensions, the time and the final speed.

Example

Masses of 5 kg and 3 kg over a pulley of 0.5 kg accelerate at (5 − 3) × 9.80665 / (5 + 3 + 0.25) = 2.377 m/s². The heavy mass drops 1 m in 0.92 s and reaches 2.18 m/s. The tension is 37.15 N on the heavy side and 36.55 N on the light side, while an ideal pulley would give 2.452 m/s².

Why it matters

The calculator helps physics students and teachers to check a lab result, to prepare a demonstration of Newton’s second law and to see how the mass of the pulley changes the motion.

Good to know

In the lab, the machine is used to measure g by timing a slow fall with two masses that are almost equal, because a small difference gives a long fall that is easy to time. The error then comes mostly from the friction of the pulley, so repeat the run with a different total mass and compare. If the lighter mass is the larger of the two in your data, the calculator takes the absolute acceleration and the sense of motion simply flips. Check also that the heavy mass has room to drop the height you enter. The value of g is 9.80665 m/s². Where the string wraps around a pulley with friction, the tension ratio between the two sides can be found with the capstan equation.

The pulley calculator gives the force needed with a block and tackle, the inclined plane calculator treats a mass on a slope, the gravitational force calculator gives weights and the angular momentum calculator covers rotating parts.

Frequently asked questions

How do you find the acceleration of an Atwood machine?

Two masses hang from a string over a pulley, and the net force is the difference of the two weights. The acceleration is the difference of the masses times g, divided by the sum of the masses plus the part of the pulley that rotates. A solid disc pulley adds half of its mass to the moving inertia. With an ideal pulley the formula is (m1 − m2) g / (m1 + m2).

Why are the two tensions different?

If the pulley has mass, a difference of tension between the two sides is needed to make it spin faster. The tensions are equal only for an ideal pulley without mass, and then each one equals 2 m1 m2 g / (m1 + m2). The calculator gives both tensions, so you can see the gap grow with the mass of the pulley.

What does the calculator leave out?

The string has no mass and does not stretch, the pulley is a solid disc and the string does not slip on it, and the air and the friction of the axle are ignored. A real machine has a lower acceleration because of friction, so the times found here are a little short.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.