Skip to content
Omnikalc

How much wood for an outdoor bench?

Enter the bench length, the seat height and depth, the slat width, gap and thickness, the backrest slats and the backrest height: get the seats, the seat slats, the slat length and the frame lumber.

Updated on
Your inputs
in

Value out of range

in

Value out of range

in

Value out of range

in

Value out of range

in

Value out of range

in

Value out of range

Value out of range

in

Value out of range

Results

Seat slats

5

Slat length

28.0 ft

Seats
2
Frame lumber (legs, back posts and rails)
18.5 ft
Use cedar, teak, oak or treated lumber with stainless screws, leave gaps so rain drains off, and tilt the backrest back about 10 to 15°

A simple wooden garden bench gives you a place to rest, admire the garden or put on boots. Its comfort depends mostly on seat height and depth, and its strength on the frame and the number of legs. This calculator works out the seats, the seat slats, the slat length and the frame lumber.

How the calculation works

  • Seats = bench length ÷ about 20 in per person, rounded down
  • Seat slats = (seat depth + gap) ÷ (slat width + gap), rounded up
  • Slat length = (seat slats + backrest slats) × bench length
  • Frame lumber = 4 legs at seat height minus slat thickness + 2 back posts above the seat + 2 × (length + depth) of rails

A 48 in bench seats 2 people. With a seat 17 in high and 16 in deep made of 3.5 in slats with 1/4 in gaps, it takes 5 seat slats plus 2 for the backrest, about 28 ft of slats and 18.5 ft of frame lumber.

Comfortable sizes

Item Typical value
Seat height 16 to 18 in
Seat depth 15 to 18 in
Width per person 20 to 24 in
Backrest height above the seat 14 to 18 in
Backrest tilt about 10 to 15° back

A lower, deeper seat suits relaxing; a higher one is easier to get up from, which older users appreciate. Armrests at about 8 to 10 in above the seat also help people stand up.

Long benches

Slats longer than about 5 ft start to bend under people’s weight, especially thin ones. For a longer bench, add a middle leg or a center rail under the slats, or use thicker slats. Join the legs with rails near the bottom to stop the bench racking from side to side.

Wood and fixings

  • Cedar, redwood, teak, white oak and black locust resist rot outdoors.
  • Pressure-treated pine is cheaper; let it dry before staining.
  • Use stainless steel or coated deck screws, and pre-drill near the ends of slats to avoid splits.
  • Round over the front edge of the seat for comfort.

Finishing and placing

Leave small gaps between slats so rain drains and the wood dries quickly. Oil or stain the bench every year or two, or let it weather to silver-gray. Set the feet on pavers or gravel rather than soil, which keeps the end grain dry and makes the bench last much longer.

Frequently asked questions

How long is a 2-seat garden bench?

About 48 in, at 20 to 24 in per person.

How high should a garden bench seat be?

About 16 to 18 in, with a seat 15 to 18 in deep.

How many slats for a garden bench seat?

A 16 in deep seat of 3.5 in slats with 1/4 in gaps takes 5 slats.

How much wood for a 4 ft garden bench?

About 28 ft of slats with a 2-slat backrest and 18.5 ft of frame lumber.

Was this calculator helpful?

Thanks for your feedback!

Results are estimates provided for information purposes. They do not replace professional advice.