Bumps, dips and low spots in a lawn are usually fixed by topdressing: spreading a thin layer of sand, soil or a mix of both over the grass and working it into the hollows. This calculator works out the volume for a given area and depth, splits it between sand and soil or compost, and counts the bags.
How the calculation works
- Volume = area × depth, converted from cubic feet to cubic yards (÷ 27)
- Sand = volume × sand share
- Soil or compost = volume × (1 − sand share)
- Bags = volume in cubic feet ÷ bag size, rounded up
Topdressing 1,000 sq ft of lawn 1/4 in deep takes about 20.8 cubic feet, or 0.77 cubic yards. With 70% sand, that is 0.54 cubic yards of sand and 0.23 of soil or compost. In 0.5 cu ft bags, you need 42 bags; for larger jobs, bulk delivery by the cubic yard is usually cheaper.
Typical depths
| Job | Depth per pass |
|---|---|
| Light topdressing after aeration | 1/8 to 1/4 in |
| Smoothing a bumpy lawn | 1/4 to 1/2 in |
| Filling low spots | Up to 1/2 in at a time, repeated |
Grass needs to grow through the layer. Spread no more than about 1/2 in at a time, let the grass come through over a few weeks, then add more if the dip is still there. Deeper holes are better fixed by lifting the turf, filling with soil and laying it back.
Sand, soil or a mix?
- Sand spreads easily, does not compact and is common on golf greens and sandy soils. On heavy clay, pure sand layers can cause drainage problems.
- Topsoil or compost adds organic matter and suits most home lawns.
- A mix, often 70% sand and 30% soil or compost, levels well while feeding the soil.
Use washed, fine sand rather than play sand with clay or sharp builder’s sand.
Spreading
- Mow short and, ideally, aerate first.
- Drop small piles across the area with a shovel or wheelbarrow.
- Spread with the back of a rake or a lawn leveling rake, working the mix into the low spots.
- Brush it down so grass blades stick up through it, and water lightly.
When to do it
Level during active growth: late spring to early summer for warm-season grasses, early fall or spring for cool-season grasses. Overseed at the same time to thicken thin areas.